The Hyperlink is a true multi-purpose foil kite. Set it up in closed cell 4-line mode on the water, or convert it to open cell 5-line mode for the ultimate in safe and versatile handling on the snow.
Trova un rivenditore
THE ULTIMATE CROSSOVER FOIL KITE FOR WATER AND SNOW
HANDLING
The V4 has been improved throughout, with lighter bar feeling and reduced aspect-ratio to make it faster and more nippy in its steering.
For kiters who are used to the handling feel of an inflatable kite, the Hyperlink V4’s similar steering performance makes it the obvious choice when transitioning to using a foil kite.
The Hyperlink V4 covers almost every aspect of kiting. Freeride, hydrofoil, boost and float, air style or unhooked as well as backcountry snow missions; it delivers for all!
The Hyperlink may not be as fast as your inflatable kite, but the way it moves and turns will feel more familiar than other foil kites.
By adding the Hyperlink V4 to your quiver you’ll enjoy incredible stability, light wind power and cross-over performance. The familiar handling feel will keep your adjustment time to a minimum, meaning you’ll be having more fun, more quickly.
“Developing the Hyperlink is always exciting. Thanks to the multi-purpose design brief it takes us from riding twin tips and foils on water, to the highest peaks in the mountains on snow… and anywhere in between.
We found the V3 could fatigue your arms on long days in the mountains, so we worked on reducing the bar pressure and steering forces while also increasing the turning speed.
The V4 is now more fun on snow as it nicely accelerates through the loops, is extremely stable while offering great depower. Oh, and it glides pretty well too! On water, the increased handling makes it more fun and easier to send for big jumps.”DOM ZIMMERMANN, OZONE HEAD KITE DESIGNER
The V4 incorporates Ozone’s signature Transverse Sail Shaping, ensuring a smoother aerodynamic profile and reducing air turbulence. The kite’s upper and lower surfaces are constructed from durable, lightweight, double rip-stop nylon with a water-shedding coating for improved aerodynamics and relaunch.
An optimised internal structure, with diagonal ribs and span-wise straps, ensures the profile maintains its shape under load, allowing consistent performance across all conditions.
The Hyperlink V4 is the ultimate cross-over foil kite, designed for both water and snow. Easily switch between 4-line closed cell mode and 5-line open cell mode:
The Hyperlink comes standard in 4-line Closed Cell Mode, which is recommended when using the kite on the water. It uses the same front line flag out safety system as our inflatable 4-line kites.
After pre-inflating the kite on the ground, the kite fully inflates itself in the air, offering responsive, intuitive steering that feels similar to an inflatable. This has been the hallmark of the Hyperlink range and why, for many, it’s the perfect first foil kite.
The new V4 model handles even faster and with more freeride and jumping capabilities, bringing it even closer to the feel of an inflatable kite.
RELAUNCH
Relaunch is also quick and easy in closed cell mode as water is kept out of the cells. To relaunch the Hyperlink just pull one line, using the relaunch ball and / or brake handle on the back leader lines.
For safety, 5-Line Open Cell Mode is recommended when riding on snow or land. Due to the valves being open, inflation is also quicker.
Paired with the optional 5- line Internal Re-Ride Release System it allows for instant depower and safe self-landing, making it perfect for adventurous snowkiters. Simply relaunch again when you’re rested and ready to go again.
Watch the full 4 line closed cell – 5 line open cell conversion video
Using the Hyperlink in closed cell 4-line mode (as recommended for use on the water), the Hyperlink V4 doesn’t shoot as far forward in the window as the Chrono. With its higher aspect-ratio design the Chrono’s airspeed is also faster, so it’s capable of producing greater board speed and boosting height, but it’s slower in its turning and wider in its arc.
If you’re familiar with our inflatable kite range, think of the Hyperlink like the Enduro and the Chrono more like the Edge. The Hyperlink is more of an all-rounder, turning tighter and easier. Generally, it is more easy-going and has an excellent relaunch.
In gusty winds, or if you’re overpowered, the Hyperlink V4 will also feel more stable.
The Chrono is the racier model and takes a little more technical foil kite know-how to handle it.
For freeride twin-tip and hydrofoil riding the Hyperlink V4 feels very intuitive. If you have some foil kite experience and are looking to ride your hydrofoil at speed, or push the biggest hang-times on your twin-tip, you should look at the Chrono for its fly and glide performance.
The Hyperlink’s tight turning and superior handling are ideal for intermediate snowkiters through to advanced riders who seek adventure, with the power to climb hills and navigate difficult terrain.
(The Chrono V5 is a closed cell design, so it can’t quickly expel air from its cells when trying to self-land / collapse the kite and kill the power, so isn’t recommended for use on the snow.)
EXPLORE V3 – Beginner to advanced riders
Single surface design, dedicated to snow. Very safe (low lift), very easy to handle and forgiving with a light feel.
HYPERLINK V4 – Intermediate to advanced riders
Do-it-all double surface design, convertible from open to closed cell. The ultimate crossover foil kite for water and snow, enabling year round use.
EXP – Advanced to expert rider
Imagine an open cell Chrono. Double surface, high performance, high-aspect snow kite.
All Ozone snow kites come with our unique Internal Re-Ride Release System which is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Three settings allow you to fine tune kite feedback and bar pressure to your liking. It is quick and easy to change with no extra lines to add or remove.
1: HYDROFOIL
Decreases bar pressure with a longer lifting period, perfect for foiling manoeuvres. The hydrofoil setting is the upper knot on the PB1 line.
2: ALL-ROUND
The ideal balance in performance and feeling for most riders and conditions. The all-round setting is the middle knot on the PB1 line (factory setting).
3: TWIN TIP
Increases bar pressure and offers a sharper, more direct feeling, perfect for twin tip riding. If you prefer a heavier and direct feel this could be the setting for you. The twin tip setting is the lower knot on the PB1 line.
We recommend 23m lines for all Hyperlink V4 sizes, but shorter lines (10m-21m) offer greater responsiveness, especially for hydrofoiling. Shorter lines also enhance upwind ability in stronger winds.
(We have various line length sets available as optional extras. Please order from your local dealer.)
The Hyperlink V4 has improved in all aspects of its handling through small but progressive design tweaks, rather than an overhaul of what was already a successful cross-over foil kite design. Read more in the ‘Features’ tab in the menu options on this page.
THE ULTIMATE CROSSOVER FOIL KITE FOR WATER AND SNOW
HANDLING
The V4 has been improved throughout, with lighter bar feeling and reduced aspect-ratio to make it faster and more nippy in its steering.
For kiters who are used to the handling feel of an inflatable kite, the Hyperlink V4’s similar steering performance makes it the obvious choice when transitioning to using a foil kite.
The Hyperlink V4 covers almost every aspect of kiting. Freeride, hydrofoil, boost and float, air style or unhooked as well as backcountry snow missions; it delivers for all!
The Hyperlink may not be as fast as your inflatable kite, but the way it moves and turns will feel more familiar than other foil kites.
By adding the Hyperlink V4 to your quiver you’ll enjoy incredible stability, light wind power and cross-over performance. The familiar handling feel will keep your adjustment time to a minimum, meaning you’ll be having more fun, more quickly.
“Developing the Hyperlink is always exciting. Thanks to the multi-purpose design brief it takes us from riding twin tips and foils on water, to the highest peaks in the mountains on snow… and anywhere in between.
We found the V3 could fatigue your arms on long days in the mountains, so we worked on reducing the bar pressure and steering forces while also increasing the turning speed.
The V4 is now more fun on snow as it nicely accelerates through the loops, is extremely stable while offering great depower. Oh, and it glides pretty well too! On water, the increased handling makes it more fun and easier to send for big jumps.”DOM ZIMMERMANN, OZONE HEAD KITE DESIGNER
The V4 incorporates Ozone’s signature Transverse Sail Shaping, ensuring a smoother aerodynamic profile and reducing air turbulence. The kite’s upper and lower surfaces are constructed from durable, lightweight, double rip-stop nylon with a water-shedding coating for improved aerodynamics and relaunch.
An optimised internal structure, with diagonal ribs and span-wise straps, ensures the profile maintains its shape under load, allowing consistent performance across all conditions.
The Hyperlink V4 is the ultimate cross-over foil kite, designed for both water and snow. Easily switch between 4-line closed cell mode and 5-line open cell mode:
The Hyperlink comes standard in 4-line Closed Cell Mode, which is recommended when using the kite on the water. It uses the same front line flag out safety system as our inflatable 4-line kites.
After pre-inflating the kite on the ground, the kite fully inflates itself in the air, offering responsive, intuitive steering that feels similar to an inflatable. This has been the hallmark of the Hyperlink range and why, for many, it’s the perfect first foil kite.
The new V4 model handles even faster and with more freeride and jumping capabilities, bringing it even closer to the feel of an inflatable kite.
RELAUNCH
Relaunch is also quick and easy in closed cell mode as water is kept out of the cells. To relaunch the Hyperlink just pull one line, using the relaunch ball and / or brake handle on the back leader lines.
For safety, 5-Line Open Cell Mode is recommended when riding on snow or land. Due to the valves being open, inflation is also quicker.
Paired with the optional 5- line Internal Re-Ride Release System it allows for instant depower and safe self-landing, making it perfect for adventurous snowkiters. Simply relaunch again when you’re rested and ready to go again.
Watch the full 4 line closed cell – 5 line open cell conversion video
Using the Hyperlink in closed cell 4-line mode (as recommended for use on the water), the Hyperlink V4 doesn’t shoot as far forward in the window as the Chrono. With its higher aspect-ratio design the Chrono’s airspeed is also faster, so it’s capable of producing greater board speed and boosting height, but it’s slower in its turning and wider in its arc.
If you’re familiar with our inflatable kite range, think of the Hyperlink like the Enduro and the Chrono more like the Edge. The Hyperlink is more of an all-rounder, turning tighter and easier. Generally, it is more easy-going and has an excellent relaunch.
In gusty winds, or if you’re overpowered, the Hyperlink V4 will also feel more stable.
The Chrono is the racier model and takes a little more technical foil kite know-how to handle it.
For freeride twin-tip and hydrofoil riding the Hyperlink V4 feels very intuitive. If you have some foil kite experience and are looking to ride your hydrofoil at speed, or push the biggest hang-times on your twin-tip, you should look at the Chrono for its fly and glide performance.
The Hyperlink’s tight turning and superior handling are ideal for intermediate snowkiters through to advanced riders who seek adventure, with the power to climb hills and navigate difficult terrain.
(The Chrono V5 is a closed cell design, so it can’t quickly expel air from its cells when trying to self-land / collapse the kite and kill the power, so isn’t recommended for use on the snow.)
EXPLORE V3 – Beginner to advanced riders
Single surface design, dedicated to snow. Very safe (low lift), very easy to handle and forgiving with a light feel.
HYPERLINK V4 – Intermediate to advanced riders
Do-it-all double surface design, convertible from open to closed cell. The ultimate crossover foil kite for water and snow, enabling year round use.
EXP – Advanced to expert rider
Imagine an open cell Chrono. Double surface, high performance, high-aspect snow kite.
All Ozone snow kites come with our unique Internal Re-Ride Release System which is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Three settings allow you to fine tune kite feedback and bar pressure to your liking. It is quick and easy to change with no extra lines to add or remove.
1: HYDROFOIL
Decreases bar pressure with a longer lifting period, perfect for foiling manoeuvres. The hydrofoil setting is the upper knot on the PB1 line.
2: ALL-ROUND
The ideal balance in performance and feeling for most riders and conditions. The all-round setting is the middle knot on the PB1 line (factory setting).
3: TWIN TIP
Increases bar pressure and offers a sharper, more direct feeling, perfect for twin tip riding. If you prefer a heavier and direct feel this could be the setting for you. The twin tip setting is the lower knot on the PB1 line.
We recommend 23m lines for all Hyperlink V4 sizes, but shorter lines (10m-21m) offer greater responsiveness, especially for hydrofoiling. Shorter lines also enhance upwind ability in stronger winds.
(We have various line length sets available as optional extras. Please order from your local dealer.)
The Hyperlink V4 has improved in all aspects of its handling through small but progressive design tweaks, rather than an overhaul of what was already a successful cross-over foil kite design. Read more in the ‘Features’ tab in the menu options on this page.
I connettori di linea infallibili impediscono il montaggio errato delle linee di volo all'aquilone.
Lavoriamo molto durante il nostro processo di ricerca e sviluppo per sviluppare una gamma di misure in sintonia fra di loro. Ogni aquilone ha un layout a briglia unico, testato individualmente e messo a punto per massimizzare la sensazione e le prestazioni.
Posizionato in modo intelligente per una facile deflazione e imballaggio.
Linee di briglia Dyneema con guaina a bassa elasticità di alta qualità per la massima resistenza e prestazioni. Questa è la stessa linea di briglie che abbiamo utilizzato sulla nostra gamma Snowkite negli ultimi 10 anni.
Utilizzo di pulegge Ronstan Orbit a basso attrito per ridurre l'usura e l'affaticamento del pilota, migliorando al contempo la sensazione e le prestazioni dell'aquilone.
Con la nostra valvola di gonfiaggio di nuova concezione, l'Hyperlink V2 può essere facilmente convertito tra le modalità a cella chiusa a 4 linee e a cella aperta a 5 linee. La combinazione del nuovo design e della posizione della valvola con una nuova struttura interna aumenta anche l'efficienza del gonfiaggio.
Ia Hyperlink è disponibile di serie in modalità a celle chiuse a 4 linee, utilizzando il nostro sistema di rilascio flag out sulla linea front. Questo è consigliato per l'uso in acqua - va' in bandiera semplice ed efficace quando il quick release viene attivato - funziona allo stesso modo della nostra gamma di kite gonfiabili a 4 linee.
Il kit di conversione opzionale del sistema di rilascio re - ride interno a 5 linee è consigliato per l'uso sulla neve o terra. Il sistema di rilascio interno re-ride de-potenzia immediatamente il kite senza aggrovigliarsi e cadere a terra per rilasciarlo decollare quando è pronto.
La Leading Edge ora presenta la modellazione trasversale della vela che crea una superficie più pulita sull'area più importante del profilo alare. Il risultato è un flusso d'aria meno turbolento e un'adesione dell'aria più lunga, che influisce positivamente sul rapporto tra sollevamento e resistenza aumentando le prestazioni complessive.
Il futuro è adesso. Tutti i kite e le ali di Ozone sono progettati con il nostro software CAD altamente avanzato e personalizzato, che controlliamo e modifichiamo ad ogni nuovo prodotto. Grazie a sviluppi tecnici specifici, i nostri progettisti possono massimizzare le prestazioni e ridurre al minimo gli sprechi.
Ozone possiede una fabbrica propria dove vengono prodotti tutti i kite, le ali, le tavole, gli aliscafi, i parapendio, le ali da velocità e gli accessori. Garantendo un controllo di qualità manuale e i migliori materiali in ogni fase, ci sono anche eccellenti condizioni di lavoro per tutti i 1000 dipendenti.
Le cinghie interne per campata funzionano all'unisono con nervature diagonali ottimizzate, distribuendo il carico dalle briglie in modo uniforme ed efficace. Ciò aumenta l'equilibrio strutturale interno, consentendo al contempo alle superfici superiore e inferiore di mantenere il profilo progettato senza essere distorte da tensioni o carichi indiretti.
Un canale interno viene modellato all'estremità di ogni cella lungo il bordo d'uscita. Ciò consente alla sabbia sciolta o all'acqua di scorrere tra le centine e fuori dai tips durante il volo. Le valvole di drenaggio su entrambe le estremità delle ali sono sigillate per impedire l'ingresso dell'aria e si aprono quando l'acqua deve defluire. I tips sigillati con velcro possono essere aperti per la pulizia del kite. Pulisci sempre il tuo aquilone svuotando acqua, sabbia o sporcizia in quanto ciò prolungherà la vita dell'aquilone e lo aiuterà a volare come progettato.
Ozone kites and wings are crafted with exceptional precision using advanced laser technology to cut each panel individually in a single layer. This meticulous approach ensures consistent accuracy across all products, from entry level to high performance models. Our commitment to high standards in production reflects our dedication to delivering reliable, high-quality equipment for riders at every level.
Durable, airtight and lightweight double rip-stop Nylon material for the upper and lower surfaces. The material has a unique formulated coating to help shed water, improving flying characteristics and water re-launch.
The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
Technical Bag with loads of space featuring an internal stash pocket and external control system pocket. Adjustable shoulder straps and foam padding provide extra comfort.
For a secure packing process to maintain the plastic pattern profile shape. Light weight materials, internal compression straps and a breathable mesh lining keep weight and packing size to a minimum - perfect when traveling with multiple kites. Combine with the Technical Bag to fit multiple kites inside one bag
All Ozone products are made to order in our own factory in Vietnam and sold through our trusted dealer network, who deliver excellent customer care and advice.
We don’t over produce and instead believe in a sustainable business model that respects people as well as the planet. Although you can't buy gear directly from us, we aim to be as transparent as possible with you about how long the production process takes.
To try and give you the fastest service possible, scroll down to check if we currently have your preferred size and colour in our small factory stock that can be shipped to your dealer immediately.
We also offer custom colours for all our kites and wings. Try your ideas out using the custom colour chooser further down this page. Once you’re happy with your design, copy the colour code and send it to your local dealer through this contact form. They will be in touch ASAP.
If you’re desperate to get your hands on a product as soon as possible, contact your nearest dealer to see if they're currently holding any stock. Click here to locate them and get in touch.
We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.
Millions of people go to the beach every year and kitesurfing is the most visually spectacular beach sport around, drawing the eyes of attention from everyone. Kites are huge and kites with a customized design can be amazing advertising spaces.
Flying up and down the beach, park or snow all day long, these spaces can be used to advertise local and international businesses, kite-schools or simply for your own kite with a design that suits you perfectly and makes you stand out a little more from the crowd. If you have your own company you can add your company logo to your kites which allows them to be written off as a business operating expense. How cool is that!
For mainstream companies the opportunity to invest in a flying Billboard is obvious at a fraction of the cost to normal advertising. So far we have worked with many of the World’s leading brands making them kites or making kites for riders sponsored by mainstream brands that see the benefit in Kite sports.
Check out some of the custom kite designs we’ve made for customers: custom kite gallery
Quotes vary depending on the complexity and size of the logo or design. We can only give a quote once we have the info (see above)
For logos to be stuck onto only 1-2 kites, we print the logo onto the white rip-stop sticky-back material. Then the logo is cut out and then stuck on the kite. The stickers typically stick very well however we cannot guarantee them for the life of the kite.
If the logo is not too complicated we can cut into the sail as its single surface (or both surfaces of foil kites). The logos look amazing and the light shines through beautifully. Price depends on the size and how complicated the logo is. Please note that we can only use our standard colour fabrics. Ask your local distributor for feasibility.
Un design pulito e semplice, con un sistema di trim facile da usare, una maniglia del freno rimovibile per facilitare il gonfiaggio, l'auto-atterraggio, rilancio reverso e il nostro innovativo Click-In Loop Quick Release.
Trova un rivenditorePush-away quick release con un’innovativa funzione di ricarica Click-In one-step incredibilmente intuitiva. La maniglia di rilascio si adatta comodamente alla mano, è facile e veloce da attivare il rilascio spingendolo via. Un meccanismo di rilascio di auto-posizionamento si posiziona automaticamente, pronto per essere ricaricato semplicemente “facendo clic” nel loop. Il Click-In Loop è certificato AFNOR NF S52-503.
Le linee anteriori da 500 kg / posteriori da 300 kg codificate a colori sono tagliate con precisione, pre-stirate, giuntate e cucite nel nostro stabilimento di produzione per garantire la precisione. Utilizziamo Dyneema a base biologica di altissima qualità: questo materiale ha le stesse prestazioni del Dyneema®® convenzionale con un’impronta di carbonio inferiore del 90% rispetto alla fibra HMPE generica.
Il nostro design modulare rende l’aggiunta o la rimozione di estensioni rapida e semplice tramite connettori pigtail end rimovibili.
L’EVA pressata in 3D con forma ergonomica e finitura leggermente levigata offre la massima presa sulla barra. È codificato a colori con le linee guida e le linee di volo per una maggiore caratteristica di sicurezza visiva.
Qual è la prima cosa che fai quando esci in macchina? Fai clic nella cintura di sicurezza, sentire quel suono “clic” ti fa sentire sicuro di essere allacciato e sai istintivamente come rilasciarlo. Il design del nostro innovativo sistema di sgancio rapido, il Click-In Loop, è stato ispirato dallo stesso principio. Allo stesso modo in cui fissare la cintura di sicurezza è diventata un’azione naturale quando si entra in un’auto, i Rider dovrebbero attivare e ricaricare i loro sistemi di rilascio prima e dopo ogni utilizzo. Sebbene questo importante controllo di sicurezza sia spesso trascurato, controllare il rilascio prima di ogni sessione garantirà il corretto funzionamento. Abbiamo sviluppato la funzione Click-In per essere semplice e intuitiva, quindi l’attivazione e il ricaricamento diventeranno una seconda natura.
Tutti i piloti devono attaccare il loro kite leash al sistema Flag Out. Questo è il piccolo occhiello sull’anello girevole in acciaio inossidabile.
Quando il rilascio è attivato, l’aquilone si depotenziera’ e cadrà nell’acqua / terra.
I Rider che eseguono trick sganciati o che sono più sicuri e hanno trascorso molte ore in kite possono collegarsi in modalità Esperto, dove la parte del loop attraversa il grande occhio dell’anello d’acciaio. Quando si lascia andare la barra in modalità Esperto (senza attivare il rilascio, ad esempio il passaggio della maniglia mancato) l’aquilone si depotenzierà ma NON andra’ in flag out.
Essere consapevoli in questa situazione, la Quick Release sarà fuori portata e non può quindi essere rilasciata. Quando è agganciato e attiva lo sgancio rapido, l’anello in acciaio scivola automaticamente e l’aquilone andra’ in flag out.
In tutte le situazioni assicurarsi che tutte le linee siano libere da tutti i sistemi di rilascio funzionanti e che il leash dell’aquilone sia collegato nel modo giusto.
Pulire sempre il sistema di controllo con acqua dolce dopo ogni sessione e ricaricare/rilasciare il click-in Loop per verificare il corretto funzionamento del sistema. Riporre il sistema di controllo con il Click-In Loop aperto. Ricaricare la prossima volta che si prepara Il Kite.