The AMP represents a new paradigm in C-kite design. It is a progressive yet user-friendly Freestyle and Park-style kite, offering amateur to pro the response, feedback and control needed to take their riding to the next level
Info pdf Encontrar una tiendaThe AMP has been developed to grow with you; no longer are the progressive kites for just the Professionals!
From your first unhooked tricks, boosting kite loops, or styling out advanced park and freestyle manoeuvers, the AMP will keep you in control with the highest level of feedback, predictable turning speed and a similar feeling precisely tuned across all sizes. It is ultra smooth to fly and provides inspirational confidence to go for it!
The AMP V2 features our new rip-stop material combination.
The new rip-stop canopy material has an advanced ultra flex coating improving feedback in gustier conditions making for a smoother ride. The new technical rip-stop dacron is super tough, used on the Leading Edge and Struts it improves strength, durability and longevity.
An all new Fast Flow One-Pump Inflation System makes set up and packing quick and easy.
It features single point inflation/deflation and a high air flow rate between the Struts and Leading Edge, with clips to seal the hoses to prevent unwanted air flow in case of damage.
The AMP features three unique and easily interchangeable performance settings to compliment your skill set and riding needs:
4-Line Bridle Mode Setting 1 – Freeride / Freestyle / Kite Loop
4-Line Bridle Mode Setting 2 – Unhooked Freestyle / Park
5-Line Mode – Unhooked Freestyle / Park (Advanced)
A refined feeling suited to general freeriding/freestyle.
Use this setting for freeride boosting and kite loops. Setting 1 is the upper knot on the Variable Bridle Geometry Pigtails.
The kite sits a little further back in the wind window and is tuned to excel unhooked. Increased bar pressure improves feeling from the kite. Setting 2 is the lower knot on the Variable Bridle Geometry Pigtails.
In 5-Line mode the AMP changes in overall performance.
The kite is supported in a tighter C-shape arc, with a more precise and direct feel on the bar, increased power during load up for pop, and increased slack when in the air. This slack also increases steering delay, offering more time for grabs and handle passes.
Re-launching in 5-Line mode is simple – either pull on one back line as in 4-Line mode, or in lighter winds reach up and pull Line no.5 to turn the kite over before re-launching.
The AMP ships standard in 4-Line Bridle mode. A simple conversion is required to the kite and control system for 5-Line mode.
To convert from 4-Line to 5-Line mode, follow these instructions.
Backline adjustments allow you to further tune the AMP to your personal preference.
The attachment closest to the trailing edge provides lighter bar pressure and a faster turn speed. The attachment closest to the leading edge provides heavier bar pressure and a slower turn speed.
There’s no need to feel left behind, join the progression and stay AMP’d!
Productos de máxima calidad mundial, hechos en nuestra propia planta, confeccionados con los mejores materiales y sometidos en cada fase de fabricación a una rigurosa inspección manual. La fábrica Ozone también produce nuestra gama de velas de parapente, paramotor, speed flying y speed riding; todos nuestros productos pasan los mismos procesos de control de calidad.
El FUTURO es AHORA - Todas las cometas y velas Ozone están diseñadas y desarrolladas usando nuestro propio y vanguardista software CAD. Nuestros diseñadores conocen muy bien las características específicas que precisan las formas y estructuras de las velas, cometas inflables y foils que desarrollamos. Parte de nuestro equipo de diseño se dedica a la mejora constante del programa CAD, así como a añadir nuevos módulos y funciones al programa a medida que continuamos desarrollando nuestros productos.
SIN poleas, SIN problemas. Diseñamos todas nuestras cometas hinchables sin poleas, para que toda nuestra gama herede las sensaciones y prestaciones únicas que trasmite Ozone.
Lo que hay en el interior también cuenta: refuerzos internos para mejorar la robustez y la durabilidad, como la costura de cierre del borde de ataque, con hilos de elevada resistencia y doble capa de dacron + cinta de sellado Insignia.
Las costuras del tejido de la cometa reciben una segunda costura tras el solape, para que la unión de los paneles quede limpia y robusta.
En todas las zonas que reciben carga, se emplean refuerzos de dacron para mejorar la distribución de la misma. Esto permite que todas las cargas se se repartan de manera uniforme en la vela para que la cometa vuele y rinda al máximo.
Nuestro método de construcción Direct Connect mejora la distribución de la carga entre el borde de ataque, las costillas y la cúpula. Las costillas van conectadas directamente al borde de ataque y llevan refuerzos internos y externos. Este exclusivo método de fabricación garantiza que se mantengan unos perfiles limpios y con la tensión óptima en la cometa.
El borde de ataque y las costillas están reforzados en las zonas de mayor tensión para garantizar que la cometa mantenga su forma y rinda al máximo.
Una tira de doble capa en el borde de fuga, con un refuerzo interno de dyneema ligero reduce el desgaste de la cometa y contribuye a mantener la tensión óptima del borde de fuga que se calculó en el diseño. La tira de dyneema también reduce cualquier posible estiramiento en el borde de fuga.
Los parachoques de borde de ataque a menudo son elementos abultados, cosméticos e innecesarios. En Ozone fabricamos nuestras cometas y velas para que rindan y duren, y empleamos los mejores materiales y componentes disponibles. En las zonas que requieren protección contra las rozaduras utilizamos un material ligero y duradero con una excelente resistencia a la abrasión, y los hacemos poco abultados para reducir la resistencia parásita y mantener las prestaciones.
Nuestras cámaras de aire las fabricamos nosotros mismos con maquinaria de soldadura propia y vanguardista. En todas las zonas de desgaste potencial se aplican capas dobles.
Los deflectores de línea antienganches evitan que las bridas y las líneas se enganchen en las puntas de la cometa. Mejora la seguridad cuando se despega con un compañero y facilita relanzar la cometa desde el agua.
Trabajamos a fondo durante nuestro proceso de I+D en el desarrollo del rango de tamaños para que las sensaciones sean homogéneas. Cada cometa tiene una geometría de bridas propia, que se prueba de manera individual y se afina para maximizar las sensaciones que transmite y sus prestaciones.
El nuevo sistema de inflado Fast Flow One-Pump hace rápido y sencillo armar y recoger la cometa. Hay un único punto de inflado/desinflado, y un elevado flujo de aire entre las costillas y el borde de ataque, con clips para estrangular los tubos y prevenir escapes no deseados en caso de daños.
Unos sables flexibles, estratégicamente ubicados a lo largo del borde de fuga, proporcionan soporte a la cúpula y reducen el flameo, lo que hace que el rider reciba mejor la información que le transmite la cometa y también reducen el desgaste del material.
Personaliza tu mando y presión de barra con los anclajes de la brida de la línea trasera. Deja el borde de ataque más cerca para girar más despacio y tener más presión de barra, o acerca el borde de fuga para girar más deprisa y reducir la presión de barra.
Los conectores de línea infalibles evitan montar de manera incorrecta las líneas de vuelo de la cometa.
- Technical Bag with loads of space
- Internal stash pocket
- External control system pocket
- Board straps
- Pump holder
- Adjustable shoulder straps
- Back panel foam padding provides extra comfort
We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.
Millions of people go to the beach every year and kitesurfing is the most visually spectacular beach sport around, drawing the eyes of attention from everyone. Kites are huge and kites with a customized design can be amazing advertising spaces.
Flying up and down the beach, park or snow all day long, these spaces can be used to advertise local and international businesses, kite-schools or simply for your own kite with a design that suits you perfectly and makes you stand out a little more from the crowd. If you have your own company you can add your company logo to your kites which allows them to be written off as a business operating expense. How cool is that!
For mainstream companies the opportunity to invest in a flying Billboard is obvious at a fraction of the cost to normal advertising. So far we have worked with many of the World’s leading brands making them kites or making kites for riders sponsored by mainstream brands that see the benefit in Kite sports.
To find out more of what we can offer click View Custom Kite Designs
Quotes vary depending on the complexity and size of the logo or design. We can only give a quote once we have the info (see above)
For logos to be stuck onto only 1-2 kites, we print the logo onto the white rip-stop sticky-back material. Then the logo is cut out and then stuck on the kite. The stickers typically stick very well however we cannot guarantee them for the life of the kite.
If the logo is not too complicated we can cut into the sail as its single surface (or both surfaces of foil kites). The logos look amazing and the light shines through beautifully. Price depends on the size and how complicated the logo is. Please note that we can only use our standard colour fabrics. Ask your local distributor for feasibility.
A clean and simple design, featuring an easy-to-use trim system and our innovative Click-In Loop Quick Release.
Info pdf Encontrar una tiendaThe Wakestyle Control System is specifically designed for Wakestyle/Freestyle riding.
Push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
Colour coded 500kg front / 300kg back lines are precision cut, pre-stretched, spliced and sewn in our own production facility to guarantee accuracy. We use the highest quality Bio-based Dyneema® – this material has the same performance as conventional Dyneema® with a carbon footprint that is 90% lower than generic HMPE fiber.
Our modular design makes adding or removing extensions quick and easy via removable pigtail end connectors.
3D pressed EVA with ergonomic shaping and a lightly sanded finish provide the ultimate bar grip. It is colour coded with the leader lines and flying lines for an added visual safety feature.
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our innovative quick release system, the Click-In Loop, was inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless Steel Swivel Ring.
When the release is activated, the kite will flag out and fall to the water/ground.
Riders performing unhooked tricks or who are more confident and have spent many hours Kiting can attach in Expert mode, where the loop part runs through the large eye of the steel ring. When letting go of the bar in Expert mode (without activating the release e.g. missed handle pass) the kite will depower but WILL NOT flag out.
Be aware in this situation, the Quick Release will be out of reach and can therefore not be released. When hooked in and activating the Quick Release the steel ring automatically slips off and the kite will flag out.
In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way.
Always clean your control system with fresh water after every session, and reload/release the Click-In Loop to check the system is functioning correctly. Store your control system with the Click-In Loop release open. Reload the next time you set up your kite.