The Hyperlink is a true multi-purpose foil kite. Set it up in closed cell 4-line mode on the water, or convert it to open cell 5-line mode for the ultimate in safe and versatile handling on the snow.
Encontrar una tienda
THE ULTIMATE CROSSOVER FOIL KITE FOR WATER AND SNOW
HANDLING
The V4 has been improved throughout, with lighter bar feeling and reduced aspect-ratio to make it faster and more nippy in its steering.
For kiters who are used to the handling feel of an inflatable kite, the Hyperlink V4’s similar steering performance makes it the obvious choice when transitioning to using a foil kite.
The Hyperlink V4 covers almost every aspect of kiting. Freeride, hydrofoil, boost and float, air style or unhooked as well as backcountry snow missions; it delivers for all!
The Hyperlink may not be as fast as your inflatable kite, but the way it moves and turns will feel more familiar than other foil kites.
By adding the Hyperlink V4 to your quiver you’ll enjoy incredible stability, light wind power and cross-over performance. The familiar handling feel will keep your adjustment time to a minimum, meaning you’ll be having more fun, more quickly.
“Developing the Hyperlink is always exciting. Thanks to the multi-purpose design brief it takes us from riding twin tips and foils on water, to the highest peaks in the mountains on snow… and anywhere in between.
We found the V3 could fatigue your arms on long days in the mountains, so we worked on reducing the bar pressure and steering forces while also increasing the turning speed.
The V4 is now more fun on snow as it nicely accelerates through the loops, is extremely stable while offering great depower. Oh, and it glides pretty well too! On water, the increased handling makes it more fun and easier to send for big jumps.”DOM ZIMMERMANN, OZONE HEAD KITE DESIGNER
The V4 incorporates Ozone’s signature Transverse Sail Shaping, ensuring a smoother aerodynamic profile and reducing air turbulence. The kite’s upper and lower surfaces are constructed from durable, lightweight, double rip-stop nylon with a water-shedding coating for improved aerodynamics and relaunch.
An optimised internal structure, with diagonal ribs and span-wise straps, ensures the profile maintains its shape under load, allowing consistent performance across all conditions.
The Hyperlink V4 is the ultimate cross-over foil kite, designed for both water and snow. Easily switch between 4-line closed cell mode and 5-line open cell mode:
The Hyperlink comes standard in 4-line Closed Cell Mode, which is recommended when using the kite on the water. It uses the same front line flag out safety system as our inflatable 4-line kites.
After pre-inflating the kite on the ground, the kite fully inflates itself in the air, offering responsive, intuitive steering that feels similar to an inflatable. This has been the hallmark of the Hyperlink range and why, for many, it’s the perfect first foil kite.
The new V4 model handles even faster and with more freeride and jumping capabilities, bringing it even closer to the feel of an inflatable kite.
RELAUNCH
Relaunch is also quick and easy in closed cell mode as water is kept out of the cells. To relaunch the Hyperlink just pull one line, using the relaunch ball and / or brake handle on the back leader lines.
For safety, 5-Line Open Cell Mode is recommended when riding on snow or land. Due to the valves being open, inflation is also quicker.
Paired with the optional 5- line Internal Re-Ride Release System it allows for instant depower and safe self-landing, making it perfect for adventurous snowkiters. Simply relaunch again when you’re rested and ready to go again.
Watch the full 4 line closed cell – 5 line open cell conversion video
Using the Hyperlink in closed cell 4-line mode (as recommended for use on the water), the Hyperlink V4 doesn’t shoot as far forward in the window as the Chrono. With its higher aspect-ratio design the Chrono’s airspeed is also faster, so it’s capable of producing greater board speed and boosting height, but it’s slower in its turning and wider in its arc.
If you’re familiar with our inflatable kite range, think of the Hyperlink like the Enduro and the Chrono more like the Edge. The Hyperlink is more of an all-rounder, turning tighter and easier. Generally, it is more easy-going and has an excellent relaunch.
In gusty winds, or if you’re overpowered, the Hyperlink V4 will also feel more stable.
The Chrono is the racier model and takes a little more technical foil kite know-how to handle it.
For freeride twin-tip and hydrofoil riding the Hyperlink V4 feels very intuitive. If you have some foil kite experience and are looking to ride your hydrofoil at speed, or push the biggest hang-times on your twin-tip, you should look at the Chrono for its fly and glide performance.
The Hyperlink’s tight turning and superior handling are ideal for intermediate snowkiters through to advanced riders who seek adventure, with the power to climb hills and navigate difficult terrain.
(The Chrono V5 is a closed cell design, so it can’t quickly expel air from its cells when trying to self-land / collapse the kite and kill the power, so isn’t recommended for use on the snow.)
EXPLORE V3 – Beginner to advanced riders
Single surface design, dedicated to snow. Very safe (low lift), very easy to handle and forgiving with a light feel.
HYPERLINK V4 – Intermediate to advanced riders
Do-it-all double surface design, convertible from open to closed cell. The ultimate crossover foil kite for water and snow, enabling year round use.
EXP – Advanced to expert rider
Imagine an open cell Chrono. Double surface, high performance, high-aspect snow kite.
All Ozone snow kites come with our unique Internal Re-Ride Release System which is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Three settings allow you to fine tune kite feedback and bar pressure to your liking. It is quick and easy to change with no extra lines to add or remove.
1: HYDROFOIL
Decreases bar pressure with a longer lifting period, perfect for foiling manoeuvres. The hydrofoil setting is the upper knot on the PB1 line.
2: ALL-ROUND
The ideal balance in performance and feeling for most riders and conditions. The all-round setting is the middle knot on the PB1 line (factory setting).
3: TWIN TIP
Increases bar pressure and offers a sharper, more direct feeling, perfect for twin tip riding. If you prefer a heavier and direct feel this could be the setting for you. The twin tip setting is the lower knot on the PB1 line.
We recommend 23m lines for all Hyperlink V4 sizes, but shorter lines (10m-21m) offer greater responsiveness, especially for hydrofoiling. Shorter lines also enhance upwind ability in stronger winds.
(We have various line length sets available as optional extras. Please order from your local dealer.)
The Hyperlink V4 has improved in all aspects of its handling through small but progressive design tweaks, rather than an overhaul of what was already a successful cross-over foil kite design. Read more in the ‘Features’ tab in the menu options on this page.
THE ULTIMATE CROSSOVER FOIL KITE FOR WATER AND SNOW
HANDLING
The V4 has been improved throughout, with lighter bar feeling and reduced aspect-ratio to make it faster and more nippy in its steering.
For kiters who are used to the handling feel of an inflatable kite, the Hyperlink V4’s similar steering performance makes it the obvious choice when transitioning to using a foil kite.
The Hyperlink V4 covers almost every aspect of kiting. Freeride, hydrofoil, boost and float, air style or unhooked as well as backcountry snow missions; it delivers for all!
The Hyperlink may not be as fast as your inflatable kite, but the way it moves and turns will feel more familiar than other foil kites.
By adding the Hyperlink V4 to your quiver you’ll enjoy incredible stability, light wind power and cross-over performance. The familiar handling feel will keep your adjustment time to a minimum, meaning you’ll be having more fun, more quickly.
“Developing the Hyperlink is always exciting. Thanks to the multi-purpose design brief it takes us from riding twin tips and foils on water, to the highest peaks in the mountains on snow… and anywhere in between.
We found the V3 could fatigue your arms on long days in the mountains, so we worked on reducing the bar pressure and steering forces while also increasing the turning speed.
The V4 is now more fun on snow as it nicely accelerates through the loops, is extremely stable while offering great depower. Oh, and it glides pretty well too! On water, the increased handling makes it more fun and easier to send for big jumps.”DOM ZIMMERMANN, OZONE HEAD KITE DESIGNER
The V4 incorporates Ozone’s signature Transverse Sail Shaping, ensuring a smoother aerodynamic profile and reducing air turbulence. The kite’s upper and lower surfaces are constructed from durable, lightweight, double rip-stop nylon with a water-shedding coating for improved aerodynamics and relaunch.
An optimised internal structure, with diagonal ribs and span-wise straps, ensures the profile maintains its shape under load, allowing consistent performance across all conditions.
The Hyperlink V4 is the ultimate cross-over foil kite, designed for both water and snow. Easily switch between 4-line closed cell mode and 5-line open cell mode:
The Hyperlink comes standard in 4-line Closed Cell Mode, which is recommended when using the kite on the water. It uses the same front line flag out safety system as our inflatable 4-line kites.
After pre-inflating the kite on the ground, the kite fully inflates itself in the air, offering responsive, intuitive steering that feels similar to an inflatable. This has been the hallmark of the Hyperlink range and why, for many, it’s the perfect first foil kite.
The new V4 model handles even faster and with more freeride and jumping capabilities, bringing it even closer to the feel of an inflatable kite.
RELAUNCH
Relaunch is also quick and easy in closed cell mode as water is kept out of the cells. To relaunch the Hyperlink just pull one line, using the relaunch ball and / or brake handle on the back leader lines.
For safety, 5-Line Open Cell Mode is recommended when riding on snow or land. Due to the valves being open, inflation is also quicker.
Paired with the optional 5- line Internal Re-Ride Release System it allows for instant depower and safe self-landing, making it perfect for adventurous snowkiters. Simply relaunch again when you’re rested and ready to go again.
Watch the full 4 line closed cell – 5 line open cell conversion video
Using the Hyperlink in closed cell 4-line mode (as recommended for use on the water), the Hyperlink V4 doesn’t shoot as far forward in the window as the Chrono. With its higher aspect-ratio design the Chrono’s airspeed is also faster, so it’s capable of producing greater board speed and boosting height, but it’s slower in its turning and wider in its arc.
If you’re familiar with our inflatable kite range, think of the Hyperlink like the Enduro and the Chrono more like the Edge. The Hyperlink is more of an all-rounder, turning tighter and easier. Generally, it is more easy-going and has an excellent relaunch.
In gusty winds, or if you’re overpowered, the Hyperlink V4 will also feel more stable.
The Chrono is the racier model and takes a little more technical foil kite know-how to handle it.
For freeride twin-tip and hydrofoil riding the Hyperlink V4 feels very intuitive. If you have some foil kite experience and are looking to ride your hydrofoil at speed, or push the biggest hang-times on your twin-tip, you should look at the Chrono for its fly and glide performance.
The Hyperlink’s tight turning and superior handling are ideal for intermediate snowkiters through to advanced riders who seek adventure, with the power to climb hills and navigate difficult terrain.
(The Chrono V5 is a closed cell design, so it can’t quickly expel air from its cells when trying to self-land / collapse the kite and kill the power, so isn’t recommended for use on the snow.)
EXPLORE V3 – Beginner to advanced riders
Single surface design, dedicated to snow. Very safe (low lift), very easy to handle and forgiving with a light feel.
HYPERLINK V4 – Intermediate to advanced riders
Do-it-all double surface design, convertible from open to closed cell. The ultimate crossover foil kite for water and snow, enabling year round use.
EXP – Advanced to expert rider
Imagine an open cell Chrono. Double surface, high performance, high-aspect snow kite.
All Ozone snow kites come with our unique Internal Re-Ride Release System which is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Three settings allow you to fine tune kite feedback and bar pressure to your liking. It is quick and easy to change with no extra lines to add or remove.
1: HYDROFOIL
Decreases bar pressure with a longer lifting period, perfect for foiling manoeuvres. The hydrofoil setting is the upper knot on the PB1 line.
2: ALL-ROUND
The ideal balance in performance and feeling for most riders and conditions. The all-round setting is the middle knot on the PB1 line (factory setting).
3: TWIN TIP
Increases bar pressure and offers a sharper, more direct feeling, perfect for twin tip riding. If you prefer a heavier and direct feel this could be the setting for you. The twin tip setting is the lower knot on the PB1 line.
We recommend 23m lines for all Hyperlink V4 sizes, but shorter lines (10m-21m) offer greater responsiveness, especially for hydrofoiling. Shorter lines also enhance upwind ability in stronger winds.
(We have various line length sets available as optional extras. Please order from your local dealer.)
The Hyperlink V4 has improved in all aspects of its handling through small but progressive design tweaks, rather than an overhaul of what was already a successful cross-over foil kite design. Read more in the ‘Features’ tab in the menu options on this page.
Los conectores de línea infalibles evitan montar de manera incorrecta las líneas de vuelo de la cometa.
Trabajamos a fondo durante nuestro proceso de I+D en el desarrollo del rango de tamaños para que las sensaciones sean homogéneas. Cada cometa tiene una geometría de bridas propia, que se prueba de manera individual y se afina para maximizar las sensaciones que transmite y sus prestaciones.
Inteligentemente ubicada para desinflar y guardar la cometa de manera fácil.
Líneas de Dyneema de alta calintensidad y bajo estiramiento, con funda que ofrecen máxima robustez y prestaciones. Son las mismas líneas que llevamos usando los 10 últimos años en nuestra gama de Snowkite.
Con poleas Ronstan Orbit de alta calidad y baja fricción que reducen el desgaste y la fatiga del rider, al tiempo que mejoran las sensaciones y prestaciones de la cometa.
Con nuestra nueva válvula de inflado, la Hyperlink V2 se puede convertir fácilmente de modo de célda cerrada de 4 líneas a modo de celda abierta de 5 líneas y viceversa. La combinación de nuestro nuevo diseño y posición de la válvula con una nueva estructura interna también aumenta la eficacia del inflado.
La Hyperlink viene de serie en modo de celdas cerradas y 4 líneas, y emplea nuestro sistema de eyección Front Line Flag Out. Es lo que recomendamos para uso en agua, pues se eyecta la cometa de manera sencilla y efectiva cuando se activa la suelta rápida. Funciona igual que el de nuestra gama de cometas de 4 líneas para agua inflables.
Para uso sobre nieve o tierra, recomendamos el kit de conversión a 5 líneas con nuestro sistema interno de suelta rápida Re-Ride. El sistema interno de suelta rápida Re-Ride despotencia al instante la cometa sin enredos, y ésta cae al suelo para ser relanzada cuando vuelta a estar lista.
El borde de ataque lleva ahora una costura transversal que crea una superficie más limpia en la parte más importante del perfil. El resultado es una circulación menos turbulenta que permite que la capa límite tarde más en desprenderse, lo que repercute positivamente en el planeo de la cometa y mejora las prestaciones.
El futuro es ahora. Todas las cometas y velas Ozone están diseñadas con nuestro propio y avanzado software CAD personalizado que controlamos y modificamos con cada nuevo diseño de producto. Al permitir desarrollos técnicos específicamente adaptados, nuestros diseñadores pueden maximizar el rendimiento al tiempo que minimizan los residuos.
Ozone posee su propia fábrica donde se fabrican todas las cometas, velas, tablas, hidroalas, parapentes, speed wings y accesorios. Garantizando un control de calidad manual y los mejores materiales en cada paso, también hay excelentes condiciones de trabajo para los 1.000 empleados.
Unas cintas de carga internas trabajan junto a costillas diagonales optimizadas, distribuyendo la carga desde las bridas de manera uniforme y eficaz. Esto mejora el equilibrio de la estructura interna, al tiempo que permite que extradós e intradós mantengan el perfil sin verse distorsionados por cargas o tensiones indirectas.
El extremo de cada celda lleva un canal interno a lo largo del borde de fuga. Esto permite que la arena suelta o el agua corran entre las celdas y salgan por las puntas durante el vuelo. Los cajones de las puntas van cerrados con velcro que puede abrirse para limpiar la cometa Limpia siempre tu cometa vaciando cualquier resto de agua, arena o suciedad, ya que esto prolongará su vida y contribuirá que vuele de la manera para la que fue diseñada.
Ozone kites and wings are crafted with exceptional precision using advanced laser technology to cut each panel individually in a single layer. This meticulous approach ensures consistent accuracy across all products, from entry level to high performance models. Our commitment to high standards in production reflects our dedication to delivering reliable, high-quality equipment for riders at every level.
Durable, airtight and lightweight double rip-stop Nylon material for the upper and lower surfaces. The material has a unique formulated coating to help shed water, improving flying characteristics and water re-launch.
The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow. This drastically improves overall performance as the foil remains true to the designed shape.
Technical Bag with loads of space featuring an internal stash pocket and external control system pocket. Adjustable shoulder straps and foam padding provide extra comfort.
For a secure packing process to maintain the plastic pattern profile shape. Light weight materials, internal compression straps and a breathable mesh lining keep weight and packing size to a minimum - perfect when traveling with multiple kites. Combine with the Technical Bag to fit multiple kites inside one bag
All Ozone products are made to order in our own factory in Vietnam and sold through our trusted dealer network, who deliver excellent customer care and advice.
We don’t over produce and instead believe in a sustainable business model that respects people as well as the planet. Although you can't buy gear directly from us, we aim to be as transparent as possible with you about how long the production process takes.
To try and give you the fastest service possible, scroll down to check if we currently have your preferred size and colour in our small factory stock that can be shipped to your dealer immediately.
We also offer custom colours for all our kites and wings. Try your ideas out using the custom colour chooser further down this page. Once you’re happy with your design, copy the colour code and send it to your local dealer through this contact form. They will be in touch ASAP.
If you’re desperate to get your hands on a product as soon as possible, contact your nearest dealer to see if they're currently holding any stock. Click here to locate them and get in touch.
We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.
Millions of people go to the beach every year and kitesurfing is the most visually spectacular beach sport around, drawing the eyes of attention from everyone. Kites are huge and kites with a customized design can be amazing advertising spaces.
Flying up and down the beach, park or snow all day long, these spaces can be used to advertise local and international businesses, kite-schools or simply for your own kite with a design that suits you perfectly and makes you stand out a little more from the crowd. If you have your own company you can add your company logo to your kites which allows them to be written off as a business operating expense. How cool is that!
For mainstream companies the opportunity to invest in a flying Billboard is obvious at a fraction of the cost to normal advertising. So far we have worked with many of the World’s leading brands making them kites or making kites for riders sponsored by mainstream brands that see the benefit in Kite sports.
Check out some of the custom kite designs we’ve made for customers: custom kite gallery
Quotes vary depending on the complexity and size of the logo or design. We can only give a quote once we have the info (see above)
For logos to be stuck onto only 1-2 kites, we print the logo onto the white rip-stop sticky-back material. Then the logo is cut out and then stuck on the kite. The stickers typically stick very well however we cannot guarantee them for the life of the kite.
If the logo is not too complicated we can cut into the sail as its single surface (or both surfaces of foil kites). The logos look amazing and the light shines through beautifully. Price depends on the size and how complicated the logo is. Please note that we can only use our standard colour fabrics. Ask your local distributor for feasibility.
A clean and simple design, featuring an easy-to-use trim system, a removable brake handle to make inflation, self-landing and reverse re-launch easier and our innovative Click-In Loop Quick Release.
Encontrar una tiendaPush-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
Colour coded 500kg front / 300kg back lines are precision cut, pre-stretched, spliced and sewn in our own production facility to guarantee accuracy. We use the highest quality Bio-based Dyneema® – this material has the same performance as conventional Dyneema® with a carbon footprint that is 90% lower than generic HMPE fiber.
Our modular design makes adding or removing extensions quick and easy via removable pigtail end connectors.
3D pressed EVA with ergonomic shaping and a lightly sanded finish provide the ultimate bar grip. It is colour coded with the leader lines and flying lines for an added visual safety feature.
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our innovative quick release system, the Click-In Loop, was inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless Steel Swivel Ring.
When the release is activated, the kite will flag out and fall to the water/ground.
Riders performing unhooked tricks or who are more confident and have spent many hours Kiting can attach in Expert mode, where the loop part runs through the large eye of the steel ring. When letting go of the bar in Expert mode (without activating the release e.g. missed handle pass) the kite will depower but WILL NOT flag out.
Be aware in this situation, the Quick Release will be out of reach and can therefore not be released. When hooked in and activating the Quick Release the steel ring automatically slips off and the kite will flag out.
In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way.
Always clean your control system with fresh water after every session, and reload/release the Click-In Loop to check the system is functioning correctly. Store your control system with the Click-In Loop release open. Reload the next time you set up your kite.