Fly

Fly

Get Flying!

Inflatable wings are a fresh and exciting way of being driven by the elements – it’s a whole load of fun across a wide range of disciplines. The Fly is an intermediate wing that is also perfectly accessible for those new to this sport.

Info Pdf Find a dealer
Estimated current manufacturing time: 19 days

Clean, Simple and Lightweight

  • User friendly inflatable wing
  • Lightweight and packs small – ideal for travel
  • Compact and stable with efficient power
  • Easy set up – inflate and go

Full Ozone wing range explainer video
Click here

quick to set up and easy to use

We took a modern design approach for the young and rapidly evolving wing market. Keeping things clean and simple the Fly is lightweight, quick to set up and easy to use. It is designed to make learning and advancing into wing propelled sports as easy and efficient as possible. Being lightweight and packing small the Fly is also an ideal travel wing.

quick to set up and easy to use We took a modern design approach for the young and rapidly evolving

grab and go

The soft Power Handle layout is user friendly with one front handle and one back handle offering a range of hand position and trimming options. This simple ‘grab and go’ setup eliminates confusion multiple handle options might cause to new comers. Sheeting in on the rear Power Handle generates a solid amount of power to get you moving, which can be fully controlled into higher wind strengths.

grab and go The soft Power Handle layout is user friendly with one front handle and one back handle
grab and go The soft Power Handle layout is user friendly with one front handle and one back handle

smooth, balanced and always in control

Tacks and gybes are easy to learn as the refined sail tension and a new panel layout keeps the Fly smooth, balanced and always in control, with the perfect amount of lift when positioning the wing over your head.

smooth, balanced and always in control Tacks and gybes are easy to learn as the refined sail tension

low aspect and compact planform

A low aspect and compact planform reduces the tips from touching the water – a very handy feature when starting out through to riding waves.

low aspect and compact planform A low aspect and compact planform reduces the tips from touching the
low aspect and compact planform A low aspect and compact planform reduces the tips from touching the

De-Power/Surf Handle

The soft De-Power/Surf Handle on the Leading Edge makes handling the wing to and from the water easy while offering full control when riding with the wing flagged out behind you.

Fast Flow Air Valves

Fast Flow Air Valves on both the Leading Edge and Strut make inflation, deflation and packing a breeze.

Fast Flow Air Valves Fast Flow Air Valves on both the Leading Edge and Strut make inflation, deflati

precisely positioned windows

Ride safe and relaxed – precisely positioned windows help to spot others around you.

precisely positioned windows Ride safe and relaxed – precisely positioned windows help to spot

Any Board Any Surface

The Fly is suitable for riding any type of board on the water that has enough volume to support your weight. In strong wind conditions and with developed skills it is possible to ride with smaller volume hydrofoil boards. On the land or snow minimal wind is required to harness the natural energy to enjoy a different feeling of propulsion.

Any Board Any Surface The Fly is suitable for riding any type of board on the water that has enough

Modular Leash

Our modular leash system can be customized for rider preference. The FLY ships standard with a Waist Strap pre-attached to the Leash Line. Leash system accessories (sold separately) are a velcro Wrist Strap and a Quick Release for use with the supplied Waist Strap or for connecting the Leash Line to a harness.

Modular Leash Our modular leash system can be customized for rider preference. The FLY ships standar

Fly bag

The Fly bag features an easy to use roll top closure and double layer foam padding inside the shoulder strap for carrying a board and foil over the shoulder.

Fly bag The Fly bag features an easy to use roll top closure and double layer foam padding inside th

Product Reviews:

Tonic Mag Review: Fly

Tonic Magazine test and review our intermediate wing model that is also perfectly accessible for those new to this sport

Poseidon Watersports Review: Fly

Chris from poseidon takes the new Fly for a first test and explains why this could be your first wing to get if you are a begginer or intermediate rider

Exceptional Ozone Factory Construction

Exceptional Ozone Factory Construction

World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory manufactures all our Kites, Wings, Boards, Hydrofoils, Paragliders, Speed Wings and Accessories - the same Quality Control processes are used across all products.

 
Designed With OZ-CAD

Designed With OZ-CAD

The future is now. All Ozone kite and wings are designed with our own highly advanced custom built CAD software that we control and modify with each new product design. Allowing for specifically tailored technical developments, our designers can maximise performance while also minimising waste. 
Internal reinforcements

Internal reinforcements

What’s on the inside counts too – internal reinforcements for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.
Overlap Flat Seams

Overlap Flat Seams

Overlap flat seam construction improves sail control resulting in an overall cleaner canopy.
Direct Connect Strut

Direct Connect Strut

Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. Struts are connected directly to the Leading Edge with internal and external reinforcements. This unique construction method ensures clean profiles are maintained with the optimum canopy tension.
Reinforced Leading Edge and Struts

Reinforced Leading Edge and Struts

The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.
Low profile aerodynamic Scuff Pads

Low profile aerodynamic Scuff Pads

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites and wings for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.
Unique bladder construction

Unique bladder construction

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.
Fast Flow Air Valves

Fast Flow Air Valves

Fast Flow Air Valves on both the Leading Edge and Strut makes inflation, deflation and packing a breeze.
Soft Power Handles

Soft Power Handles

The soft Power Handle layout is user friendly with one front handle and one back handle offering a range of hand position and trimming options. This simple ‘grab and go’ setup eliminates confusion multiple handle options might cause to new comers.
De-power/Surf Handle

De-power/Surf Handle

The soft De-Power/Surf Handle on the Leading Edge makes handling the wing to and from the water easy while offering full control when riding with the wing flagged out behind you.
Anti-Flap Soft Battens

Anti-Flap Soft Battens

Soft Battens strategically positioned along the Trailing Edge provide canopy support and reduce flutter, enhancing feedback to the rider and also reducing canopy material wear.
Easy View Windows

Easy View Windows

Easy view windows on either side of the strut provide safety for you and others around.
Webbing Leash Line

Webbing Leash Line

The Webbing Leash Line features a strong tubular webbing with internal bungee core. It connects to the wings Leading Edge via a loop-to-loop connection and can easily be removed if necessary.
Wing Waist Strap

Wing Waist Strap

The Waist Strap is slim and lightweight with a strong buckle closure and size adjustment buckle. It connects to the Leash Line via a loop-to-loop connection. If you become overpowered or lose control let go of the wing and it will de-power on the Leash Line. Our wings ship standard with a Waist Strap pre-attached to the Leash Line.
Wing Quick Release (Optional)

Wing Quick Release (Optional)

The easy to use Quick Release is for riders who prefer extra security to detach from the wing in a fast and easy way. It is compatible with the Wing Waist Leash or a harness. The Wing Quick Release is sold separately.
Wing Wrist Strap (Optional)

Wing Wrist Strap (Optional)

The Wrist Strap features a velcro closure with a soft neoprene inside layer. It connects to the Leash Line via a loop-to-loop connection, If you become overpowered or lose control let go of the wing and it will de-power on the leash line. The Wrist Strap is sold separately.

Thank you for purchasing this Ozone product. Our mission is to design and build quality products with cutting edge performance that are easy, fun and safe to use.

At Ozone we are passionate about sports, and it is this passion that drives our design team to perfect and develop products that we love to ride with. We are proud of the quality of our products, and are constantly searching for the best components and materials to use in our designs. We manufacture in our own high-quality production facility in Vietnam, which guarantees a build quality that we are proud to put the Ozone name on. A close look at one of our products reveals that same superior quality and construction that ensures that every Ozone product will enjoy a long life, with consistent performance and aesthetics. To view the factory video visit our website www.flyozone.com. Many dynamic action sports carry inherent risks but with common sense and education from qualified instructors means you can easily enjoy these incredible sports. Accidents generally happen due to a lack of experience, changing weather conditions or from using equipment not suited to the riders’ ability and/or conditions. Always take the time to learn safely with qualified instruction and you will progress far quicker. Ride safe Team Ozone

Release of Liability

OZONE KITESURF LTD / OZONE KITES LTD RELEASE OF LIABILITY, CLAIM WAVIER, ASSUMPTION OF RISK

By assembling and/or using this Ozone product, you agree that you have read and understood the entire Ozone product owners manual, including all instructions and warnings contained in that manual, prior to using the Ozone product in any way. You additionally agree that you will ensure any additional or subsequent user of your Ozone product will read and understand the entire Ozone product owners manual, including all instructions and warnings contained in that manual, prior to allowing that person to use your Ozone product.

ASSUMPTION OF RISK

Use of the Ozone product and any of its components involve certain risks, dangers, and hazards which can result in serious personal injury and death to both the user and to non-user third parties. In using this Ozone product, you freely agree to assume and accept any and all known and unknown risks of injury to you and third parties while using this equipment. The risks inherent in this sport can be greatly reduced by abiding by the warning guidelines listed in this owner manual and by using common sense.

RELEASE AND WAIVER OF CLAIMS

In consideration of the sale of the Ozone product to you, you herby agree to the fullest extent permitted by law, as follows;

TO WAIVE ANY AND ALL CLAIMS that you have or may in the future have against Ozone Kitesurf LTD or Ozone Kites LTD and all related parties resulting from use of the Ozone product and any of its components.

TO RELEASE Ozone Kitesurf LTD or Ozone Kites LTD and all related parties from any and all liability for any loss, damage, injury or expense that you or any users of you Ozone product may suffer, or that your next of kin may suffer, as a result of the use of the Ozone product, due to any cause whatsoever, including negligence or breach of contract on the part of Ozone Kitesurf LTD or Ozone Kites LTD and all related parties in the design or manufacture of the Ozone product and any of its components.

In the event of your death or incapacity, all provisions contained herein shall be effective and binding upon your heirs, next of kin, executors, administrators, assigns, and representatives. Ozone Kitesurf LTD or Ozone Kites LTD related parties have not made and expressly deny and oral or written representations other than what is set forth herein and the Ozone product owners manual.

Warranty

Ozone warrants this product according to the laws in force against any major manufacturing defect. This warranty is subject to the following limitations:

  • The warranty is valid only when the product is used for its intended use, and does not cover products used in rental or teaching operations.
  • Ozone will make the final warranty determination, which may require inspection and/or photos of the equipment, which clearly show the defect(s). If necessary, this information must be sent to the Ozone dealer, postage prepaid.
  • If a product is deemed to be defective by Ozone, the warranty covers the repair or replacement of the defective product only.
  • Ozone will not be responsible for any costs, losses, or damages incurred as a result of loss of use of this product. The warranty does not cover damage caused by misuse, abuse, neglect or normal wear and tear including but not limited to; assembling with other than Ozone components, damage due to excessive sun exposure, damage caused by improper handling or storage, and damage caused by anything other than defects in material and workmanship.
  • This warranty is voided if any unauthorized repair, change or modification has been made to any part of the equipment. The warranty for any repaired or replaced equipment is good from the date of the original purchase only. The original purchase receipt must accompany all warranty claims.
  • The name of the retailer and date of purchase must be clear and legible.
  • There are no warranties that extend beyond the warranty specified herein.

WARRANTY CLAIMS

  • Warranty claims must be sent to Ozone by an official Ozone dealer or country distributor.
  • Warranty claims must be processed and be issued a return authorization prior to shipping to the Ozone dealer the product was purchased from.

WARNING

  • Always use extreme caution when using this product.

  • Misuse of this product can cause serious injury or death.

  • Only use this product if you are in good physical health.

  • Never act in a careless manner when using this product (such as jumping in the air, or tying yourself down).

  • You are responsible for your own safety, and the safety of others around you when using this product.

  • If you are under 18 you should have your parents or legal guardian read these warnings and instructions. You should not use this product unless you are under proper guidance and supervision.

  • The use of this product exposes the user to many unavoidable and unexpected risks, dangers and hazards.

  • Do not use this product if you are under the influence of alcohol, drugs or medications.

  • Before using this product you must take lessons from a certified instructor/school.

  • Always wear a helmet when using this product.

  • This product is not a personal flotation device. Always wear a Coast Guard approved personal flotation device when using this product near the water.

  •  Always carefully inspect all of your equipment before using it.

  • Never allow anyone who is not familiar with this product to use it without experienced assistance.

  • This product is equipped with user operated release systems, which need to be activated by the user to work.

  • The leash system is not a permanent attachment to this product. Never permanently attach yourself to the product or any of its components.

  • This manual refers to the current product it comes with. No information contained herein applies to previous and/or other products. Always read and understand all warnings and instructions for any other product being used. To view previous product manuals go to www.flyozone.com

Choose safe weather conditions:

  • Never learn to use this product in more than 10 knots of wind.
  • We highly recommend you purchase a wind speed indicator to be able to measure wind speeds.
  • Never use this product in high winds.
  • Never use this product in thunderstorm and lightning conditions.
  • Only use this product when you can remain in a standing position.
  • Never use this product in wind conditions that are above your ability level.
  • Never use this product near or on the water in offshore wind conditions.

Choose a safe location:

  • Always observe local rules and regulations when using this product.
  • Do not use this product near other people or pets. Spectators should remain upwind of you when using this product.
  • Never use this product on crowded beaches or fields.
  • Never use this product near the water unless you know how to swim and are in good physical health.
  • Practice self rescue techniques before using this product near the water.

Set Up:

  • Attach the pump leash to the wing, around the leash line connection loop.
  • Inflate the Strut first.
  • Check the valve is clean and free from sand/grit around the rubber seal.
  • Screw the valve in firmly to the base.
  • Open the top valve cap.
  • Inflate using the IN valve.
  • Refer to the recommended inflation pressures located next to the Leading Edge and Strut inflate/deflate valves.
  • Do not over inflate above the recommendation.
  • Do not under inflate or it will not perform as designed.
  • Close the top valve cap. Double check the valve is tightened firm and is sealing.
  • Close the protection cover.
  • Repeat inflation steps for the Leading Edge.
  • Never leave unattended without securing the wing. If needed attach the leash to a sand bag, board, or a weight/solid object to secure the wing.

Security

Always use the Leash. Attach it before you start.

  • Wrap the Waist Strap around your waist and close the buckle.
  • Adjust to fit snug around your waist
  • If you become overpowered or loose control let go of the wing, it will de-power on the leash line.
  • If you need to completely free yourself from the wing undo the Waist Strap. Be aware the wing will likely become out of reach.

First Use

  • Never learn to use this product in more than 10 knots of wind.
  • The wing has a de-power handle on the Leading Edge and power handles on the Strut.
  • When carrying the wing use the de-power handle.
  • To practice sheeting the wing for power, first take hold of the front power handle, then reach back to take hold of a rear power handle.
  • Sheet the wing in to power up, and out to de-power.
  • Practice sheeting the wing in and out to feel how the power is generated.
  • Practice handling the wing on land before going in the water.

Water Self Rescue

  • Turn the wing to face the power handles upwards.
  • Open the Leading Edge OUT valve to deflate.
  • Fold the wing tip on tip then roll to the centre.
  • Screw the valve back in to seal the bladder.
  • Open the Strut OUT valve to deflate.
  • Make sure no water enters the valves while they are open.
  • Fold the wing in two or three sections.
  • Screw the valve back in to seal the bladder.
  • Wrap the leash line around the wing to keep it secured.
  • Wrap the waist strap around the wing, close the buckle and tighten to secure.
  • Paddle/swim back to shore with your board and wing.
  • In case you become separated from your board we recommend leaving the strut inflated for buoyancy.

Packing

  • Open the OUT valves. The large valves dump air quickly.
  • Roll one side of the wing to the centre.
  • Squeeze all air out from the strut.
  • Roll up the opposite side of the wing to the centre.
  • Screw the valves back in a few turns and close the protection covers.
  • Fold in sections from the trailing edge to fit into the bag.

NOTE:
If packing on the water, after rolling the wing up, screw the valves back in to seal the bladders to avoid water entering.

Product Care

This is a technical product used in harsh outdoor environments.
Use common sense and care for your equipment.

•Never inflate this product on a rough surface.

•Inflate slowly and ensure the bladders are inflating correctly. If you see a twist or something looks strange stop pumping immediately and check bladders. They may need re-inserting to ensure they inflate properly.

•Once you have inflated secure the product. Do not use heavy objects. Boards and fins can damage the material.

•Never leave this product un-used for long periods of time in the sun and wind. UV, canopy flapping due to wind, sand etc hitting the sailcloth can all severely shorten the products lifespan.

•Never pack this product wet, only when completely dry. Packing wet can damage the material and its coatings and may lead to dye running. This is not valid for warranty.

•Never leave this product inside a car or in direct sunlight.

Repairs

We supply a repair kit with the following contents:

1. A4 pieces of sail cloth

2. A4 piece of Dacron

3. 1 x length of 50mm wide sticky black repair tape

4. 6” x 3” Tear-Aid bladder repair patch

5. 2 Alcohol wipes

If you have a major repair like a tear across panels, struts or the leading edge take the kite to your local sail repair shop. For minor tears and bladder punctures you can easily fix these yourself with the repair kit supplied with the kite.

Watch repair and maintenance videos

Current production colours

Custom Colours

We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.


Colour Chooser

If you want to order your amazing design then your dealer will need the colour codes to get it right. Please send them this code:
Share with a friend Download my custom design file Send to a Dealer

Anything is Possible…

Get your own branded kite – the ultimate advertising billboard

Millions of people go to the beach every year and kitesurfing is the most visually spectacular beach sport around, drawing the eyes of attention from everyone. Kites are huge and kites with a customized design can be amazing advertising spaces.

Flying up and down the beach, park or snow all day long, these spaces can be used to advertise local and international businesses, kite-schools or simply for your own kite with a design that suits you perfectly and makes you stand out a little more from the crowd. If you have your own company you can add your company logo to your kites which allows them to be written off as a business operating expense. How cool is that!

For mainstream companies the opportunity to invest in a flying Billboard is obvious at a fraction of the cost to normal advertising. So far we have worked with many of the World’s leading brands making them kites or making kites for riders sponsored by mainstream brands that see the benefit in Kite sports.

Check out some of the custom kite designs we’ve made for customers: custom kite gallery

Anything is Possible… Get your own branded kite – the ultimate advertising billboard Mil

How do I Order?

  • Thats easy, contact your nearest Ozone dealer or country Importer by clicking the link below…
  • Our dealer will then email us the info and we will obtain a quote with 5 working days.
  • Once agreed you pay for the Kite & Logo cost so production of the kite can commence.
  • Your order will ship within 2-4 weeks (depending on how busy the factory is) from date payment is received.

FIND A DEALER

How do I Order? Thats easy, contact your nearest Ozone dealer or country Importer by clicking the l

What does it Cost?

Quotes vary depending on the complexity and size of the logo or design. We can only give a quote once we have the info (see above)

LOGO STUCK:

For logos to be stuck onto only 1-2 kites, we print the logo onto the white rip-stop sticky-back material. Then the logo is cut out and then stuck on the kite. The stickers typically stick very well however we cannot guarantee them for the life of the kite.

CUT INTO SAIL:

If the logo is not too complicated we can cut into the sail as its single surface (or both surfaces of foil kites). The logos look amazing and the light shines through beautifully. Price depends on the size and how complicated the logo is. Please note that we can only use our standard colour fabrics. Ask your local distributor for feasibility.

find your local distributor

Related Products