Find your FLOW state for rapid riding level improvement and easy freeride progression!
Offering the ultra-smooth feel of the Flux, the Flow’s more compact span, extra low end power, longer front carbon handle and lightweight handling feel all combine to make this a total weapon for dedicated wave riders and those looking to jump and throw freestyle moves
Find a dealerOur aim was to make a wing with a greater sense of control to help riders accelerate their riding progression, from tacking and gybing, to jumping or wave riding, the Flow is designed to smoothly deliver what you need.
Sitting between the Fly (entry level to intermediate freeride / wave riding) and the Flux (high end, full speed performance freeride), the Flow is a brand new wing to the line-up.
When it comes to improving the fluidity and ease of your riding, the extended front carbon handle offers the advantages of a boom, like flying the wing one handed and easy hand placement, yet it packs small and doesn’t need to be removed after your session.
Although it replaces the WASP in the range, the Flow is an entirely different concept, based on the handling advantages programmed in the Flux’s DNA. The Flow, however, has less span and lower aspect ratio than the Flux, offering more low end power and easier handling.
The tough and scuff-able airframe delivers clean aerodynamic performance, but is also built for the kind of beach handling that intermediates put a wing through.
The Flow is a fully featured design and, when you’re ready to ride faster, harder and for longer with less arm fatigue in stronger conditions, a harness line can be attached around the rigid handle mounts or tube for customised rider preference (sold separately).
The Flow has a responsive, lightweight and easy feel. Delivering both progressive power with good low end torque to get you up on foil, it also has range to handle stronger winds and speed without losing control. Highly manoeuvrable and yet incredibly stable overhead, tacks and gybes are made easy when passing the wing from hand to hand, giving you time to relax and complete the manoeuvre.
The extended front handle allows for balanced one handed steering, opening up all sorts of expressive carving manoeuvres in flat water. Instead of riding with a locked-in two-handed position, you can maintain power and control while holding the wing out to the side in one hand, offering a very fluid and free feeling.
If your primary aim is riding waves and swells, whatever the size and quality, the Flow is for you. The span and aspect-ratio are perfectly tuned to help prevent wing tip touchdowns and to provide a beautiful centre of power when riding one handed.
The extended front handle is also particularly good for wave riding where you might quickly want to switch between powered up sailing and drifting. In small wave conditions, or in cross-onshore wind swell, it’s not always worth the big movement to grab the surf handle. The Flow’s longer front handle allows you instead to find a balance point to steer the wing one handed and still benefit from having a little pull from the wing.
The Flow is equipped with a new semi-rigid surf handle that gives you even more control and prevents the wing inverting. In good waves there’s nothing like ripping back and forth with a beautifully balanced wing drifting obediently behind you.
The Flow’s compact design, tight sail, on-tap power, rigid handles, excellent manoeuvrability and impressive boost capabilities make it a great choice for freestylers. It’s fast for spinning and is excellent if you want to get inverted as the sail behaves well when going from positive to negative loads. No matter if you are just starting to get air or a seasoned freestyler; the Flow ticks all the boxes.
We’ve used the reliable and rugged Teijin dacron on the leading edge and struts to provide excellent resistance to flex and abrasion. The canopy is made from Teijin’s proven 55g triple ripstop because this is a wing designed for constant action.
As with all our products we were able to save weight but still ensure integrated strength is built in throughout. The Flow is made with great care by the hands of our expert team of sewers in our manufacturing facility.
Using our custom OzCAD design software developed in-house, every stitch and square inch of material placement is carefully calculated and results in a super clean finish and well tensioned sail.
Each part of the Flow’s design has been tailored to create an all-round performance wing with a mid-price range on which any intermediate through to expert wingfoiler can rip on without restraint.
u003ch2 class=u0022p1u0022u003eu003cspan style=u0022color: #a2a9ad;u0022u003eu003cbu003eTRANSPORTATION ISN’T ALWAYS JUST ABOUT GETTING FROM A TO B. u003c/bu003eu003c/spanu003eu003cspan style=u0022color: #a2a9ad;u0022u003eu003cbu003eAS A RIDER, HOW YOU FEEL ON THE JOURNEY IS WHAT REALLY MATTERSu003c/bu003eu003cspan class=u0022s1u0022u003e u003c/spanu003eu003c/spanu003eu003c/h2u003e
The future is now. All Ozone kite and wings are designed with our own highly advanced custom built CAD software that we control and modify with each new product design. Allowing for specifically tailored technical developments, our designers can maximise performance while also minimising waste.
Ozone uniquely owns its own factory where all kites, wings, boards, hydrofoils, paragliders, speed wings and accessories are made. Guaranteeing hand checked quality control and the finest materials at every step, there are also excellent working conditions for all 1000 employees.
Ergonomically angled front and back carbon fibre handles with EVA grip provide maximum control and comfort with incredible feel and response. The front handle mount features a soft bumper to protect your head and board during water starts.
Easy view windows on either side of the strut provide safety for you and others around.
Horizontal canopy panels and adjoining seams optimise load distribution through warp and weft of the material, improving feeling and reducing material stretch.
The De-Power/Surf Handle at the front of the Leading Edge offers increased control when flying the wing single-handed and features a soft knuckle padding for extra comfort.
Our Direct Connect construction method improves load distribution between the Leading Edge, Strut and Canopy. The Strut is connected directly to the Leading Edge with internal and external reinforcements. This unique construction method ensures clean profiles are maintained with the optimum canopy tension.
What’s on the inside counts too – internal reinforcements for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.
Fast Flow Air Valves on both the Leading Edge and Strut makes inflation, deflation and packing a breeze.
Overlap flat seam construction improves sail control resulting in an overall cleaner canopy.
Quick and easy to install, our Wing Harness Line is a slim and lightweight design with an internal bungee contracting when unhooked to stay out of the way.
The Waist Strap is slim and lightweight with a strong buckle closure and size adjustment buckle. It connects to the Leash Line via a loop-to-loop connection. If you become overpowered or lose control let go of the wing and it will de-power on the Leash Line. Our wings ship standard with a Waist Strap pre-attached to the Leash Line.
The easy to use Quick Release is for riders who prefer extra security to detach from the wing in a fast and easy way. It is compatible with the Wing Waist Leash or a harness. The Wing Quick Release is sold separately.
The Wrist Strap features a velcro closure with a soft neoprene inside layer. It connects to the Leash Line via a loop-to-loop connection, If you become overpowered or lose control let go of the wing and it will de-power on the leash line. The Wrist Strap is sold separately.
A harness line can be attached around the handle mounts or tube for customised rider preference.
The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.
Rigid Battens strategically positioned along the Trailing Edge improve canopy tension and reduce flutter - enhancing performance, feedback to the rider and reducing canopy material wear.
Trailing Edge reinforcement with an internal lightweight Dyneema line reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed.
Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites and wings for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.
Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.
The Swivel Leash Line features a strong Dyneema line with internal bungee core and an ultra light Stainless Steel swivel to keep the leash twist free. It connects to the wings Leading Edge via a loop-to-loop connection and can easily be removed if necessary.
The Flow is the result of all that we’ve learnt through more than two decades of Ozone running its own factory that builds paragliders, wingsuits, kites, wings and accessories. A thousand highly trained employees apply their skills across nine factory floors, including the dedicated prototyping department that operates full time. The turnaround on ideas into physical products is super fast and allows for the development of strong, lightweight and perfectly trimmed products to come to life.
Intense high performance levels are borne from the fact that our designers capitalise on having 100% access to the factory to try new ideas and then produce as many prototypes as it takes to make products feel just right.
Ozone not only owns all its own production processes in the factory but also in design. Our highly advanced, custom built OzCAD software, built from the ground up, means that our designers intimately understand every square inch of pressure exerted in each size of every product. Part of our design team is dedicated to the upgrade of the CAD code as well as the addition of new modules and features to the program as the development of our products continues.
At Ozone we have always believed in designing lightness and strength into our paragliders, kites and now wings, to be as efficient in flight as possible.
Naturally, the lighter the kite or wing is, the better it will fly. The stronger it is, the longer its performance will last.
We avoid adding surplus features or unnecessary cosmetic items to our designs and use top of the line materials put through a rigorous testing programme.
If you compare the weights of any Ozone kite or wing against the most dedicated light weight specific products produced by our competitors, you’ll see that all our products are just born light. Even on our entry level designs we don’t compromise the handling benefits that airborne products undoubtedly have through being lighter.
Combined with cutting edge manufacturing and highly skilled craftspeople our designs are Born Light; Genetically Strong.
Technical, performant, durable and efficient – the lightness and strength is built in.
At Ozone we are passionate about sports, and it is this passion that drives our design team to perfect and develop products that we love to ride with. We are proud of the quality of our products, and are constantly searching for the best components and materials to use in our designs. We manufacture in our own high-quality production facility in Vietnam, which guarantees a build quality that we are proud to put the Ozone name on. A close look at one of our products reveals that same superior quality and construction that ensures that every Ozone product will enjoy a long life, with consistent performance and aesthetics. To view the factory video visit our website www.flyozone.com. Many dynamic action sports carry inherent risks but with common sense and education from qualified instructors means you can easily enjoy these incredible sports. Accidents generally happen due to a lack of experience, changing weather conditions or from using equipment not suited to the riders’ ability and/or conditions. Always take the time to learn safely with qualified instruction and you will progress far quicker. Ride safe Team Ozone
By assembling and/or using this Ozone product, you agree that you have read and understood the entire Ozone product owners manual, including all instructions and warnings contained in that manual, prior to using the Ozone product in any way. You additionally agree that you will ensure any additional or subsequent user of your Ozone product will read and understand the entire Ozone product owners manual, including all instructions and warnings contained in that manual, prior to allowing that person to use your Ozone product.
Use of the Ozone product and any of its components involve certain risks, dangers, and hazards which can result in serious personal injury and death to both the user and to non-user third parties. In using this Ozone product, you freely agree to assume and accept any and all known and unknown risks of injury to you and third parties while using this equipment. The risks inherent in this sport can be greatly reduced by abiding by the warning guidelines listed in this owner manual and by using common sense.
In consideration of the sale of the Ozone product to you, you herby agree to the fullest extent permitted by law, as follows;
TO WAIVE ANY AND ALL CLAIMS that you have or may in the future have against Ozone Kitesurf LTD or Ozone Kites LTD and all related parties resulting from use of the Ozone product and any of its components.
TO RELEASE Ozone Kitesurf LTD or Ozone Kites LTD and all related parties from any and all liability for any loss, damage, injury or expense that you or any users of you Ozone product may suffer, or that your next of kin may suffer, as a result of the use of the Ozone product, due to any cause whatsoever, including negligence or breach of contract on the part of Ozone Kitesurf LTD or Ozone Kites LTD and all related parties in the design or manufacture of the Ozone product and any of its components.
In the event of your death or incapacity, all provisions contained herein shall be effective and binding upon your heirs, next of kin, executors, administrators, assigns, and representatives. Ozone Kitesurf LTD or Ozone Kites LTD related parties have not made and expressly deny and oral or written representations other than what is set forth herein and the Ozone product owners manual.
Always use extreme caution when using this product.
Misuse of this product can cause serious injury or death.
Only use this product if you are in good physical health.
Never act in a careless manner when using this product (such as jumping in the air, or tying yourself down).
You are responsible for your own safety, and the safety of others around you when using this product.
If you are under 18 you should have your parents or legal guardian read these warnings and instructions. You should not use this product unless you are under proper guidance and supervision.
The use of this product exposes the user to many unavoidable and unexpected risks, dangers and hazards.
Do not use this product if you are under the influence of alcohol, drugs or medications.
Before using this product you must take lessons from a certified instructor/school.
Always wear a helmet when using this product.
This product is not a personal flotation device. Always wear a Coast Guard approved personal flotation device when using this product near the water.
Always carefully inspect all of your equipment before using it.
Never allow anyone who is not familiar with this product to use it without experienced assistance.
This product is equipped with user operated release systems, which need to be activated by the user to work.
The leash system is not a permanent attachment to this product. Never permanently attach yourself to the product or any of its components.
This manual refers to the current product it comes with. No information contained herein applies to previous and/or other products. Always read and understand all warnings and instructions for any other product being used. To view previous product manuals go to www.flyozone.com
Always use the Leash. Attach it before you start.
NOTE:
If packing on the water, after rolling the wing up, screw the valves back in to seal the bladders to avoid water entering.
This is a technical product used in harsh outdoor environments.
Use common sense and care for your equipment.
•Never inflate this product on a rough surface.
•Inflate slowly and ensure the bladders are inflating correctly. If you see a twist or something looks strange stop pumping immediately and check bladders. They may need re-inserting to ensure they inflate properly.
•Once you have inflated secure the product. Do not use heavy objects. Boards and fins can damage the material.
•Never leave this product un-used for long periods of time in the sun and wind. UV, canopy flapping due to wind, sand etc hitting the sailcloth can all severely shorten the products lifespan.
•Never pack this product wet, only when completely dry. Packing wet can damage the material and its coatings and may lead to dye running. This is not valid for warranty.
•Never leave this product inside a car or in direct sunlight.
We supply a repair kit with the following contents:
1. A4 pieces of sail cloth
2. A4 piece of Dacron
3. 1 x length of 50mm wide sticky black repair tape
4. 6” x 3” Tear-Aid bladder repair patch
5. 2 Alcohol wipes
If you have a major repair like a tear across panels, struts or the leading edge take the kite to your local sail repair shop. For minor tears and bladder punctures you can easily fix these yourself with the repair kit supplied with the kite.
We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.
Millions of people go to the beach every year and kitesurfing is the most visually spectacular beach sport around, drawing the eyes of attention from everyone. Kites are huge and kites with a customized design can be amazing advertising spaces.
Flying up and down the beach, park or snow all day long, these spaces can be used to advertise local and international businesses, kite-schools or simply for your own kite with a design that suits you perfectly and makes you stand out a little more from the crowd. If you have your own company you can add your company logo to your kites which allows them to be written off as a business operating expense. How cool is that!
For mainstream companies the opportunity to invest in a flying Billboard is obvious at a fraction of the cost to normal advertising. So far we have worked with many of the World’s leading brands making them kites or making kites for riders sponsored by mainstream brands that see the benefit in Kite sports.
Check out some of the custom kite designs we’ve made for customers: custom kite gallery
Quotes vary depending on the complexity and size of the logo or design. We can only give a quote once we have the info (see above)
For logos to be stuck onto only 1-2 kites, we print the logo onto the white rip-stop sticky-back material. Then the logo is cut out and then stuck on the kite. The stickers typically stick very well however we cannot guarantee them for the life of the kite.
If the logo is not too complicated we can cut into the sail as its single surface (or both surfaces of foil kites). The logos look amazing and the light shines through beautifully. Price depends on the size and how complicated the logo is. Please note that we can only use our standard colour fabrics. Ask your local distributor for feasibility.
