- Kite
- Wing
- Race
- Snow
- More Ozone
Whether your passion is freeride or backcountry missions the new subzero has you covered! The Subzero V1 is a completely new design dedicated purely for Snowkiting. Together with our latest design understanding it combines our favorite characteristics of the legendary Frenzy and Summit models into one all-round performance open cell foil kite.
Find a dealerWill feel at home with the Subzero. Our design team has refined the bridle configuration to offer an amazing feeling on the bar. The new planform and profiles offer ultimate stability in gusty winds and optimized strap positions distribute load evenly throughout the sail, this all translates to smooth, predictable power delivery and snappy handling.
The Subzero allows the adventurous to push the boundaries of the snowy backcountry. It has incredible potential due to its fast direct handling and amazing power generation in light winds, but also big de-power in strong winds. The Subzero’s enhanced stability makes difficult backcountry rides and mountain climbing more accessible and enjoyable. Combine that with our revolutionary Internal Re-Ride Release System and you have the ultimate backcountry Snowkite.
The Subzero V1 is available as a Kite Only option with the lightweight Kompressor Bag, or Kite Complete with the Contact-Snow Control System and Technical Mountain Backpack. We recommend adding the Snowkite Kompressor Bag to the kite complete option to keep your kite packed and secured as small as possible.
The Internal Re-Ride Release System is the result of two years research and development by our design team and pro riders, with the aim to create the safest system on the market. The goal was to have a release system that once activated the kite can easily be re-launched without having to untangle or clear any lines. Our unique Re-Ride Release System stalls the kite with an internal line – the kite de-powers instantly without tangling and will sit on the ground ready to re-launch when you’re ready again.
Another advantage of our Internal Re-Ride Release System is the land and secure option. The Secure Loop can be found in the 5th line approx 2m up from the control bar. To land the kite simply pull the 5th line through the chicken loop until you reach the Secure Loop. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground – it can either be hooked onto a carabineer on your harness or over the bar horn. This makes landing and packing your kite safe and easy even in high winds.
We thoroughly enjoyed developing and testing the Internal Re-Ride Release System. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user.
Note:
• The Internal Re-Ride Release System cannot be upgraded to older kites as it includes lines that are running inside your kite.
• For reverse launch and light wind landing we have kept the Brake Stall Handle between the back leader lines.
World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory manufactures all our Kites, Wings, Boards, Hydrofoils, Paragliders, Speed Wings and Accessories - the same Quality Control processes are used across all products.
The future is now. All Ozone kite and wings are designed with our own highly advanced custom built CAD software that we control and modify with each new product design. Allowing for specifically tailored technical developments, our designers can maximise performance while also minimising waste.
Our unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
We use durable OzTex 40D material on our standard range of snow kites. This material sets the benchmark in quality with proven superiority in durability and dynamics for snow specific kites.
Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance that helps control the high aspect ratio, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
High quality, low stretch sheathed bridle lines for maximum strength and performance. This is the same line we have used on our Snowkite range for over 10 years
Under surface Blow-out-valves help avoid damage by releasing excess internal air pressure if the kite is crashed into the ground.
The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
We work extensively during our R&D process to develop the size range to feel in tune with each other. Every kite has a unique bridle layout, individually tested and fine-tuned to maximize the feeling and performance.
Fool proof line connectors prevent incorrect rigging of the flying lines to the kite.
An all-new push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our new release system, the Click-In Loop, is inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
• Innovative Click-In Loop
• Two Release Modes
• Three Loop Size Options
• Spinning Head with Anti-twist Flag Out Line
• Stainless Steel Leader Line Pin
• Light Weight Aluminium Centre Piece
• Ergonomic EVA Grip
• PU Covered De-power Line
• Stainless Steel Trimmer Bracket
• Clamcleat Trimmer
• Re-launch Balls
• 500kg/300kg Flying Lines
All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless Steel Swivel Ring. When the release is activated, the kite will flag out and fall to the water/ground.
In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way.
Always clean your control system with fresh water after every session, and reload/release the Click-In Loop to check the system is functioning correctly. Store your control system with the Click-In Loop release open. Reload the next time you set up your kite.