Alpha V1

A winner for any quiver

Photo : Håkon Mæland
  • Single strut design
  • Freeride and travel specialist
  • Amazing performance for freeride hydro-foiling
  • Incredibly light weight
Trouvez un distributeur

Infos produit

The Alpha V1 is a unique single strut design that has redefined our expectations of inflatable kites. It’s simple, incredibly lightweight and very effective – it is a winner for any quiver.

Grab a twin tip and go cruising or jumping, enjoy the ride while progressing with ease. You will be surprised at the jumping and looping capabilities of the Alpha; it has smooth lift and hang-time with precise feedback. The Alpha has great upwind performance thanks to the innovative flat arc design and an efficient high lift airfoil section.

The lightweight design translates to incredible low-end performance making the Alpha a very competitive choice not only for light wind freeriding, but also the expanding freeride hydrofoil scene in almost any wind strength. The power to de-power stroke is progressive and dynamic enough to provide smooth lift for transitions and jibes with a foil board.

Read more

For high wind foiling in chop or waves, take a small size with shorter lines for loads of fun drifting the kite while carving swells across the wind.

In the surf the Alpha is perfect for drift style wave riding as it floats with you. The handling is direct and responsive which allows you to put the kite where you need it. The Alpha is not as dedicated to waves as the Reo, but it still delivers solid performance in cross-shore to on-shore conditions.

Water re-launch is easy, by simply turning the bar or using the re-launch balls on the leader lines, the kite will roll over into the re-launch position.

Going traveling? Take the Alpha with you, it’s incredibly lightweight, packs small and can do anything you want to do on any given day…

The Alpha V1 comes standard with an ultra lightweight Compressor Bag, perfect for travelling and day-to-day protection for your kite. It is easy to use and compresses a kite to minimal size. Combine with the Technical Bag to fit multiple kites inside one carry bag.

Téléchargements (PDF)

Vidéo

Caractéristiques

  • Designed With OZ-CAD
    Designed With OZ-CAD Designed With OZ-CAD

    The FUTURE is NOW - All Ozone kites are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with features specifically tailored to the unique forms and structures of technical Inflatable and foil kites. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our kites continues.

  • Exceptional Ozone Factory Construction
    Exceptional Ozone Factory Construction Exceptional Ozone Factory Construction

    World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory also manufactures our Paragliding and Speed Wing range; the same Quality Control processes are used across all products.

     

  • Teijin TechnoForce D2 & Teijin Dacron
    Teijin TechnoForce D2 & Teijin Dacron Teijin TechnoForce D2 & Teijin Dacron

    Teijin is the world’s leading supplier of polyester fabrics and sail materials for marine sports. We use the remarkably durable Teijin D2 canopy material in all our water kites. Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.
    We use the incredibly strong and reliable Teijin Dacron in all our water kites. Dacron is used on parts requiring rigidity and stability – the Leading Edge, Struts, Wingtips, and all loaded areas with extra reinforcement for enhanced load distribution and durability.

  • 4-line Pulley-less System
    4-line Pulley-less System 4-line Pulley-less System

    NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

  • One-Pump Inflation System
    One-Pump Inflation System One-Pump Inflation System

    The One Pump inflation system enables quick and easy setup with single point inflation of the kite. All Struts are connected to the Leading Edge via inflation points – air will flow through the hose to inflate the entire kite. Clips seal the hose connecting the Struts and Leading Edge to prevent unwanted airflow in case of damage.

  • High volume inflate/deflate valve
    High volume inflate/deflate valve High volume inflate/deflate valve

    A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack your kite with ease.

  • Tuned Bridle Geometry
    Tuned Bridle Geometry Tuned Bridle Geometry [water kite]

    We work extensively during our R&D process to develop the size range to feel in tune with each other. Every kite has a unique bridle layout, individually tested and fine-tuned to maximize the feeling and performance.

  • Fool proof line connectors
    Fool proof line connectors Fool proof line connectors [water]

    Fool proof, colour coded and numbered line connectors prevent incorrect rigging of the flying lines to the kite.

  • Anti-Snag line deflectors
    Anti-Snag line deflectors Anti-Snag line deflectors [new]

    The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

  • Direct Connect Struts
    Direct Connect Struts Direct Connect Struts [new curved]

    Our Direct Connect construction method improves load distribution between the Leading Edge, Struts and Canopy. The Struts are connected directly to the Leading Edge with internal reinforcements and external webbing. This unique construction method ensures clean profiles are maintained with the optimum canopy tension

  • Unique bladder construction
    Unique bladder construction Unique bladder construction

    Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

  • Double Stitched Folded Seams
    Double Stitched Folded Seams Double Stitched Folded Seams

    Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.

  • Internal reinforcements
    Internal reinforcements Internal reinforcements

    What’s on the inside counts too – All Ozone kites are internally reinforced for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.

  • Load Distribution Panels
    Load Distribution Panels Load Distribution Panels

    Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

  • Low profile aerodynamic Scuff Pads
    Low profile aerodynamic Scuff Pads Low profile aerodynamic Scuff Pads

    Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

  • Reinforced Leading Edge and Struts
    Reinforced Leading Edge and Struts Reinforced Leading Edge and Struts

    The Leading Edge and Struts are reinforced in high stress areas to ensure the kite canopy remains in shape and performs at its best.

  • Reinforced Trailing Edge
    Reinforced Trailing Edge Reinforced Trailing Edge

    Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.

Systèmes de contrôles.

Contact Water V4

Trouvez un distributeur

Customisez

Grâce à ce custom chooser, vous pouvez designer votre propre combinaison de couleur pour votre kite. Bougez la souris au dessus des box de couleurs pour avoir un aperçu de chaque section de l’aile. Cliquer sur la couleur pour la choisir. Quand vous avez fini vous pouvez envoyer le design a un ami, ou aux distributeur de votre pays de commande, et verifier s’il y a un surcout. Veuillez noter que parce que c’est un kite custom il sera construit exprès pour vous et votre aile sera construite après réception du paiement.

  • Choose Colors

  • Kite Size

  • Send Design To

  • Continue

Produits associés