The Subzero V2 is the ultimate performance Snowkite for a wide variety of riders. Whether your passion is Freeride or Backcountry missions the Subzero has you covered!
Find a dealerThe V2 is designed with some of the lightest materials available on the market, offering true performance increases and enhanced flying characteristics across all aspects. It inflates quicker, launches in lighter winds, flies faster, stays in the air longer in gusty conditions and is more reactive even in the lightest breeze.
The planform and profile combination delivers superior stability in flight, even when bashed by gusty winds. The optimized strap positions distribute load evenly throughout the sail, translating to smooth, predictable power delivery and snappy handling. Reduced bar pressure and lighter steering forces will let you ride all day without fatigue and intensify the feeling of a light kite.
The Subzero has paved the way for the adventurous to push the boundaries of backcountry riding. It has incredible potential due to its fast direct handling and amazing power generation in light winds, but also big de-power in strong winds.
The Subzero’s enhanced stability makes difficult backcountry rides and mountain climbing more accessible and enjoyable. Combine that with our revolutionary Internal Re-Ride Release System and you have the quintessential backcountry Snowkite.
The Subzero V2 ships with a lightweight Compressor Bag to keep the kite packed and secured as small as possible. We recommend adding the Technical Mountain Bag to carry multiple kites and all your essential gear on longer backcountry missions.
Our unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
Another advantage of our Internal Re-Ride Release System is the land and secure option. To land the kite simply pull the 5th line until you reach the Secure Loop which can be found approx 2m up from the control bar. The kite will stall and fall to the ground without any pull. Use the Secure Loop in the 5th line to keep the kite on the ground – it can be hooked onto the kite leash clip, or slipped over the bar end. This makes landing and packing your kite safe and easy even in high winds. The Brake Handle spanned between the back leader lines on the control system makes reverse launch and light wind landing easy.
World-class construction in our own factory, using the highest quality materials and hand checked Quality Control at every step. The Ozone factory manufactures all our Kites, Wings, Boards, Hydrofoils, Paragliders, Speed Wings and Accessories - the same Quality Control processes are used across all products.
The FUTURE is NOW - All Ozone kites and wings are designed and developed using our own highly advanced custom built CAD software. Our designers are able to work with features specifically tailored to the unique forms and structures of technical inflatable and foil kites and wings. Part of our design team is dedicated to the upgrade of the CAD code and addition of new modules and features to the program as the development of our products continues.
Our unique Internal Re-Ride Release System is the market leading Snowkite release and landing system. It has made mountain climbing and packing so much more enjoyable, safe, easy and quick for the user. When activated the kite de-powers instantly without tangling, and will sit on the ground ready to re-launch when you’re ready again.
High quality Ultra Light materials have been used extensively on our Kites and Paragliders since 2011. Using Ultra Light materials translates to true performance increases - the kite inflates quicker, flies faster and is more reactive even in the lightest breeze.
Using high spec low friction Ronstan Orbit pulleys to reduce wear and rider fatigue while improve feeling and performance of the kite.
Flexible lightweight plastic battens are precisely positioned at each Leading Edge cell opening. The battens enhance structure of the openings, this means quicker and easier inflation.
Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.
High quality, low stretch sheathed Dyneema bridle lines for maximum strength and performance. This is the same bridle line we have used on our Snowkite range for the past 10 years.
The Velcro sealed cells at the tips can be opened for cleaning the kite. Always clean your kite by emptying any snow or debris as this will prolong the life of the kite and help it fly as designed.
Fool proof line connectors prevent incorrect rigging of the flying lines to the kite.
We work extensively during our R&D process to develop the size range to feel in tune with each other. Every kite has a unique bridle layout, individually tested and fine-tuned to maximize the feeling and performance.
A clean and simple design, featuring an easy-to-use trim system and our innovative Click-In Loop Quick Release.
Find a dealer
Push-away quick release with an innovative one-step Click-In reload function that is incredibly intuitive. The release handle fits comfortably in the hand, it is quick and easy to activate the release by pushing the handle away. A self-positioning release mechanism locates automatically, ready to be re-loaded by simply ‘clicking’ in the loop. The Click-In Loop is AFNOR NF S52-503 certified.
Colour coded 500kg front / 300kg back lines are precision cut, pre-stretched, spliced and sewn in our own production facility to guarantee accuracy. We use the highest quality Bio-based Dyneema® – this material has the same performance as conventional Dyneema® with a carbon footprint that is 90% lower than generic HMPE fiber.
Our modular design makes adding or removing extensions quick and easy via removable pigtail end connectors.
3D pressed EVA with ergonomic shaping and a lightly sanded finish provide the ultimate bar grip. It is colour coded with the leader lines and flying lines for an added visual safety feature.
What’s the first thing you do when you get in a car? You click in your seatbelt, hearing that ‘click’ sound makes you feel secure that you are safely buckled up, and you know instinctively how to release it. The design of our innovative quick release system, the Click-In Loop, was inspired by the same principle. In the same way fastening your seatbelt has become a natural action when getting into a car, riders should activate and reload their release systems before and after every use. Although this important safety check is often overlooked, checking your release before each session will ensure it is functioning properly. We developed the Click-In function to be simple and intuitive, so activating and reloading will become second nature.
All riders should attach their Kite Leash to the Flag Out System. This is the small eyelet on the Stainless Steel Swivel Ring.
When the release is activated, the kite will flag out and fall to the water/ground.
Riders performing unhooked tricks or who are more confident and have spent many hours Kiting can attach in Expert mode, where the loop part runs through the large eye of the steel ring. When letting go of the bar in Expert mode (without activating the release e.g. missed handle pass) the kite will depower but WILL NOT flag out.
Be aware in this situation, the Quick Release will be out of reach and can therefore not be released. When hooked in and activating the Quick Release the steel ring automatically slips off and the kite will flag out.
In all situations make sure that all lines are clear of all working release systems and the kite leash is connected in the right way.
Always clean your control system with fresh water after every session, and reload/release the Click-In Loop to check the system is functioning correctly. Store your control system with the Click-In Loop release open. Reload the next time you set up your kite.
