Amp V2

Progression to the people

The AMP represents a new paradigm in C-kite design. It is a progressive yet user-friendly Freestyle and Park-style kite, offering amateur to pro the response, feedback and control needed to take their riding to the next level.

Info pdf Trouver un revendeur
Estimated current manufacturing time: 25 days

Grow with You

  • User-friendly progressive kite
  • Primary focus on being predictable and adaptable
  • Two Variable Bridle Geometry settings (4-Line Mode)
  • 5-Line conversion option

The AMP has been developed to grow with you; no longer are the progressive kites for just the Professionals! 

 

Providing Inspirational Confidence

From your first unhooked tricks, boosting kite loops, or styling out advanced park and freestyle manoeuvers, the AMP will keep you in control with the highest level of feedback, predictable turning speed and a similar feeling precisely tuned across all sizes. It is ultra smooth to fly and provides inspirational confidence to go for it!

new rip-stop material combination

The AMP V2 features our new rip-stop material combination.
The new rip-stop canopy material has an advanced ultra flex coating improving feedback in gustier conditions making for a smoother ride. The new technical rip-stop dacron is super tough, used on the Leading Edge and Struts it improves strength, durability and longevity.

all new Fast Flow One-Pump

An all new Fast Flow One-Pump Inflation System makes set up and packing quick and easy.
It features single point inflation/deflation and a high air flow rate between the Struts and Leading Edge, with clips to seal the hoses to prevent unwanted air flow in case of damage.

Interchangeable Performance Settings

The AMP features three unique and easily interchangeable performance settings to compliment your skill set and riding needs:

4-Line Bridle Mode Setting 1  – Freeride / Freestyle / Kite Loop

4-Line Bridle Mode Setting 2 – Unhooked Freestyle / Park

5-Line Mode – Unhooked Freestyle / Park (Advanced)

4-LINE MODE SETTING 1 

FREERIDE / FREESTYLE / KITE LOOP

A refined feeling suited to general freeriding/freestyle.
Use this setting for freeride boosting and kite loops. Setting 1 is the upper knot on the Variable Bridle Geometry Pigtails.

4-LINE MODE SETTING 2

UNHOOKED FREESTYLE / PARK


The kite sits a little further back in the wind window and is tuned to excel unhooked. Increased bar pressure improves feeling from the kite. Setting 2 is the lower knot on the Variable Bridle Geometry Pigtails.

5-LINE MODE

UNHOOKED FREESTYLE / PARK (ADVANCED)


In 5-Line mode the AMP changes in overall performance.
The kite is supported in a tighter C-shape arc, with a more precise and direct feel on the bar, increased power during load up for pop, and increased slack when in the air. This slack also increases steering delay, offering more time for grabs and handle passes.

Re-launching in 5-Line mode is simple – either pull on one back line as in 4-Line mode, or in lighter winds reach up and pull Line no.5 to turn the kite over before re-launching.

4-LINE TO 5-LINE CONVERSION INFORMATION

The AMP ships standard in 4-Line Bridle mode. A simple conversion is required to the kite and control system for 5-Line mode.

  • Included with each AMP kite is a 5-Line Conversion Kit (specific to the kite size) containing 1x Y-bridle and 2x Front Line Pigtails.
  • Line no.5 (5th line) is required for the control system to use the AMP in 5-Line mode. This can be ordered separately, contact your dealer/shop for more info.

To convert from 4-Line to 5-Line mode, follow these instructions.

View pdf    Watch Video

Tune your Amp some more

Backline adjustments allow you to further tune the AMP to your personal preference.
The attachment closest to the trailing edge provides lighter bar pressure and a faster turn speed. The attachment closest to the leading edge provides heavier bar pressure and a slower turn speed.

There’s no need to feel left behind, join the progression and stay AMP’d!

CONTROL SYSTEM OPTIONS

The AMP can be set up with both WAKESTYLE and CONTACT WATER Control Systems.

WAKESTYLE

  • Compact de-power throw
  • Large size Harness Loop for easy hooking in and out
  • 23m lines (other lengths optional)
  • Optional 5th Line

CONTACT WATER

  • Standard de-power throw – increased de-power range and more forgiving during crashes
  • Medium size Harness Loop (Small/Large sizes optional)
  • 25m lines (other lengths optional)
  • Optional 5th Line
Système de gonflage One-Pump à débit rapide

Système de gonflage One-Pump à débit rapide

Le système de gonflage à une pompe à débit rapide facilite la mise en place et le rangement. Il comporte l’inflation/déflation d’un seul point et un taux élevé de flux d’air entre les lattes et le bord d’attaque, avec des agrafes pour sceller les tuyaux pour empêcher le flux d’air non désiré en cas de dommages.

Lattes souples anti-flaps

Lattes souples anti-flaps

Les lattes souples positionnées stratégiquement le long du bord de fuite fournissent un soutien et réduisent le flottement, améliorant la rétroaction du kite au rider et réduisant également l’usure des matériaux.

Connecteurs de ligne infaillibles

Connecteurs de ligne infaillibles

Les connecteurs de ligne empêchent le gréement incorrect des lignes au kite.

Latte connectée au bord d’attaque

Latte connectée au bord d’attaque

Notre méthode de construction à connexion directe améliore la répartition de la charge entre le bord d’attaque et les lattes. Les entretoises sont connectées directement au bord d’attaque avec des renforts internes et externes. Cette méthode de construction unique garantit des profils propres et parfaitement maintenus avec la tension optimale du tissu.

Optimisation du bridage

Optimisation du bridage

Nous travaillons beaucoup au cours de notre processus de R&D pour développer la gamme de tailles pour nous sentir en harmonie les uns avec les autres. Chaque kite a une disposition de bride unique, testée individuellement et affinée pour maximiser le sentiment et la performance.

Construction exceptionnelle d’une usine d’ozone

Construction exceptionnelle d’une usine d’ozone

Construction de classe mondiale dans notre propre usine, en utilisant des matériaux de la plus haute qualité et un contrôle de la qualité vérifié à la main à chaque étape. L’usine Ozone fabrique également notre gamme Parapente et Speed Wing; les mêmes processus de contrôle de la qualité sont utilisés dans tous les produits.

 

Coutures doubles cousues pliées

Coutures doubles cousues pliées

Les coutures de la verrière de la voile sont cousues, pliées, puis cousues à nouveau pour une connexion propre et solide des panneaux.

Renforts internes

Renforts internes

Ce qui est à l’intérieur compte aussi – des renforts internes pour une résistance et une durabilité améliorées; comme une couture de fermeture Dacron + Insignia scotchée Double couche avec des filetages à haute résistance.

Bord d’attaque et lattes renforcées

Bord d’attaque et lattes renforcées

Le bord d’attaque et les lattes sont renforcés dans les zones de tension élevées pour s’assurer que la canopée du kite reste en forme.

Bord de fuite renforcé

Bord de fuite renforcé

Bande de bord de fuite à double couche avec un renfort interne léger Dyneema - cela réduit l’usure de la verrière et aide à maintenir une tension optimale du bord de fuite tel que conçu. La ligne Dyneema réduit également tout tronçon potentiel au bord de fuite.

Conçu avec OZ-CAD

Conçu avec OZ-CAD

L’AVENIR est MAINTENANT - Tous les kites et wings Ozone sont conçus et développés à l’aide de notre propre logiciel de CAO personnalisé très avancé. Nos concepteurs sont en mesure de travailler avec des fonctionnalités spécialement adaptées aux formes et structures uniques des kites et des ailes gonflables et en caisson. Une partie de notre équipe de conception se consacre à la mise à niveau du code CAO et à l’ajout de nouveaux modules et fonctionnalités au programme au fur et à mesure que le développement de nos produits se poursuit.

4-line Pulley-less System

4-line Pulley-less System

NO pulleys, NO problems. We design all our inflatable kites without pulleys, to inherit the unique Ozone feeling and performance across our range.

Load Distribution Panels

Load Distribution Panels

Dacron reinforcements are used on all loaded areas for enhanced load distribution. This means all loads are spread evenly into the sail ensuring the kite flies and performs at its best.

Low profile aerodynamic Scuff Pads

Low profile aerodynamic Scuff Pads

Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites and wings for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.

Unique bladder construction

Unique bladder construction

Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas.

Anti-Snag line deflectors

Anti-Snag line deflectors

The Anti-Snag line deflectors prevent bridles and lines from tangling around the wing tip. Safety is increased when launching with a partner and water re-launch is made easier.

Back-line trimming options

Back-line trimming options

Customise your handling and bar pressure with the back line bridle attachments. Closer to the Leading Edge for slower turn speed and more bar pressure, or closer to the Trailing Edge for faster turn speed and less bar pressure.

Water Kite Technical Bag

Water Kite Technical Bag

- Technical Bag with loads of space

- Internal stash pocket

- External control system pocket

- Board straps

- Pump holder

- Adjustable shoulder straps

- Back panel foam padding provides extra comfort

Custom Colours

We can make any combination of colours using the colour chooser below. The manufacturing time for these special kites is 30 days. Design your kite, share with your friends and ask your dealer to place your order.