R1 V4

Accessible Performance
is True Performance

  • Race specific kite
  • Ultimate performance 
  • State of the art technology
  • Advanced riders only
Encuentra un distribuidor

Info Producto

The R1 V4 has been derived from the extremely successful R1 V2 and V3, both of which set the benchmark in kite racing competitions.

The V4 design takes it to the next level, delivering supercharged performance while maintaining the R1s well known ease of use and accessibility. 

Developed closely with our top team riders, multiple World Champion Nico Parlier and 2019 World Champion Axel Mazella we have pulled out all the stops.

The new re-designed internal structure has allowed us to increase cell count up to 8% while reducing bridle line up to 12%, accounting for major parasitic drag reduction.

The Leading Edge now features Double Transversal Shaping creating a cleaner surface on the most important area of the aerofoil. The result is less turbulent airflow and longer skin adhesion, which positively effects the lift to drag ratio increasing overall performance.

Read more

The top and bottom surfaces use our time proven Ultra Light materials, with an even lighter weight material for the internal structure on the 15m to 21m sizes keeping weight down and improving light wind flying characteristics. 

The Leading Edge air intakes have been refined for faster progressive inflation, improved seal and optimised positioning to maintain internal air pressure. This enhances land and water re-launch capabilities.

The all-new R1 V4 Pro-Tune Speed System is lightweight and low drag using reduced line diameters and features incredibly simple adjustment via the stream line self-locking Splice Trim System.

What do these design changes mean? More speed, more power, better upwind and downwind angles in a package that is as easy to use as its predecessors!

All R1 V4 sizes are IKA registered.

IMPORTANT NOTES:

  • The R1 V4 is for advanced riders only who have previous foil kite experience. It is not difficult to fly but there are techniques required to fly a high aspect ratio foil kite. 
  • The R1 V4 materials have been used extensively on our Ultra Light Kites and Paragliders since 2011. The kite must be carefully looked after, it needs an experienced rider who knows how to keep the kite up in the air and how to handle it gently on the ground.
  • The kite is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out. Do not use the kite in waves.
  • Always use a Brake Handle when flying a foil kite. This is the handle/line spanned between the back leader lines on the control system. This easy to grab handle makes inflation, self-landing and reverse launch easier.
  • This kite features a simple yet effective front line flag out release. After releasing the flag out you should check the speed system, bridle lines and your flying lines for twists before restart.
  • The R1 V4 must be packed using the concertina method. If the kite is packed and stored using any other method such as rolling this will void the warranty. The Leading Edge plastic battens are a fundamental part of the design and must not be forced out of their given shape otherwise the kite can loose stability and flying characteristics. See R1 V4 How to Pack video.
  • The Speed System and Bridle lines will require maintenance just like any high performance equipment in racing sports - they must be checked after every 60 hours flying time and maintained in the correct trim or the kite will not perform as designed. Bridle Lines that are worn or not to factory specification (+ or - 15mm) must be replaced. Speed System lines that are worn must be replaced. If the Speed System lines are not worn but are not to factory specifications you must adjust back to factory spec. 

Vídeo

Características

  • Excepcional construcción de la fábrica Ozone
    Excepcional construcción de la fábrica Ozone Exceptional Ozone Factory Construction

    Realizamos construcción de primera clase en nuestra propia fábrica, utilizando materiales de la más alta calidad y controles de calidad controlados a mano en cada paso. La fábrica de Ozone también fabrica nuestra gama de Parapentes y Speed Wing range; los mismos procesos de control de calidad se utilizan en todos los productos.

  • Diseñado con OZ-CAD
    Diseñado con OZ-CAD Designed With OZ-CAD

    El FUTURO es AHORA - Todas las cometas Ozone están diseñadas y desarrolladas utilizando nuestro propio software personalizado de CAD altamente avanzado. Nuestros diseñadores son capaces de trabajar con parámetros específicamente formulados para calcular los aspectos únicos requeridos en las cometas técnicas inflables y foil. Parte de nuestro equipo de diseño se dedica a la actualización del código CAD y la adición de nuevos módulos y características al programa, ya que el desarrollo de nuestras cometas continúa.

  • Alto rendimiento con material Ultra Light
    Alto rendimiento con material Ultra Light High Performance Ultra Light Materials [R1 V3]

    Los materiales de la R1 V3 se han utilizado ampliamente en los modelos; R1 V2, las cometas Ultra Light y paragliders durante los último cinco años. El uso de materiales ultra ligeros se traduce en verdaderos aumentos de rendimiento - la cometa se infla más rápido, vuela más rápido y es más reactivo incluso en la brisa más ligera.

  • Double Transversal Shaping
    Double Transversal Shaping Double Transversal Shaping[r1-V4]

    The Leading Edge now features Double Transversal Shaping creating a cleaner surface on the most important area of the aerofoil. The result is less turbulent airflow and longer skin adhesion, which positively effects the lift to drag ratio increasing overall performance.

  • High Cell Count
    High Cell Count High Cell Count [R1-V4]

    A high number of cells controls ballooning between the ribs, holding the wing shape and designed surfaces smoother and more accurately. This reduces turbulent airflow, providing more efficiency, speed and de-power for increased overall performance.

  • Optimized Leading Edge Air Intakes
    Optimized Leading Edge Air Intakes Optimized Leading Edge Air Intakes [R1-V4]

    The Leading Edge air intakes have been refined for faster progressive inflation, improved seal and optimised positioning to maintain internal air pressure. This enhances land and water re-launch capabilities.

  • Perfil del borde de ataque reforzado
    Perfil del borde de ataque reforzado L.E Profile Reinforcements

    El borde de ataque se refuerza con los listones plásticos ligeros flexibles para mantener la forma del perfil durante los cambios de ángulo de ataque y flujo de aire turbulento. Esto mejora drásticamente el rendimiento general, ya que el foil permanece fiel a la forma diseñada.

  • Internal Diagonals and Straps
    Internal Diagonals and Straps Internal Diagonals and Straps[R1-v4]

    Internal span-wise straps work in unison with optimized diagonal ribs, distributing load from the bridles evenly and effectively. This increases the internal structural balance, while allowing the top and bottom surfaces to maintain the designed profile without being distorted from indirect tension or loads.

  • High Performance Bridle Lines
    High Performance Bridle Lines High Performance Bridle Lines [R1 V4]

    High performance Kevlar bridle lines are a key component to the R1’s outstanding performance. Kevlar is tough, strong and has unbeaten stretch and shrinkage characteristics keeping your kite at the highest performance trim. 

  • Pro-Tune Speed System
    Pro-Tune Speed System Pro-Tune Speed System [R1-V4]

    The all-new R1 V4 Pro-Tune Speed System is lightweight and low drag using reduced line diameters and features incredibly simple adjustment via the stream line self-locking Splice Trim System. Durable line materials reduce wear and tear on the pulley lines, with increased resistance to stretch or shrinkage for a longer life span. The Speed System is a Double-Pulley layout using high spec low friction Ronstan Orbit pulleys. NOTE: You must watch the How To video before adjusting your Speed System settings.

  • Canales de drenaje
    Canales de drenaje Water Drainage Channels

    Hay un canal interno en el extremo de cada celda a lo largo del borde de fuga. Esto permite que la arena suelta o el agua fluyan entre las celdas y  salga hacia fuera por las puntas durante el vuelo. Las celdas selladas con velcro en las puntas se pueden abrir para limpiar la cometa. Siempre limpia tu cometa vaciandola de cualquier agua, arena o suciedad, ya que esto prolongará la vida de la cometa y la ayudará a volar como ha sido diseñada.

  • Cremallera de deflación impermeable
    Cremallera de deflación impermeable Waterproof deflation zipper

    Esta posicionado de forma inteligente para una fácil desinflación y empaquetado/guardado.

  • Closed Cell Kite Technical Bag (optional)
    Closed Cell Kite Technical Bag (optional) Closed Cell Kite Technical Bag (optional) [R1-V4]

    Technical Bag with loads of space featuring an internal stash pocket and external control system pocket. Adjustable shoulder straps and foam padding provide extra comfort. 

  • Closed Cell Kite Compressor Bag (optional)
    Closed Cell Kite Compressor Bag (optional) Closed Cell Kite Compressor Bag (optional) [R1-V4]

    For a secure packing process to maintain the plastic pattern profile shape. Light weight materials, internal compression straps and a breathable mesh lining keep weight and packing size to a minimum - perfect when traveling with multiple kites. Combine with the Bag to fit multiple kites inside one bag.

Re-designed Internal Structure

The new re-designed internal structure has allowed us to increase cell count up to 8% while reducing bridle line up to 12%, accounting for major parasitic drag reduction.

 

Internal Structure

Barras

Foil Race V4

lo último en kite race; barra con sistema de trimaje con doble polea y con nuestra última innovación: el Click-In Loop.

El innovador Click-In Loop
Una liberación rápida Push-away completamente nueva con una función innovadora de re-armado Click-In, en un solo paso e increíblemente intuitiva. La empuñadura de liberación se adapta ergonómicamente a la mano, activar la seguridad es un proceso rápido y fácil, tan solo debes empujar el mango. Un mecanismo de liberación de posicionamiento automático se activa automáticamente,…

Encuentra un distribuidor

Personalizar

Usando este selector de color personalizado, puedes diseñar tu propia combinación de colores para tu cometa.

Mueve el ratón sobre los cuadros de colores para previsualizar el color de cada sección del ala. Haz clic en el color para seleccionarlo.

Cuando hayas terminado, puedes enviar tu diseño a un amigo, o el distribuidor / concesionario de tu país para realizar tu pedido y para comprobar si hay algún cargo.

Ten en cuenta que debido a que este es una cometa hecha a medida y se construirá específicamente para ti, su pago debe ser recibido antes de que la producción pueda comenzar.

  • Elige color

  • Medida cometa

  • Enviar diseño a

  • Continuar

Productos relacionados